SIG P-Series Modern Classic Hammer
$119.00
The Grayguns P-Series Modern Classic™ Commander Hammer is the ultimate action upgrade for your DA/SA SIG Sauer® pistol.
Our design perfects the advanced geometry of the first custom-made hammers Bruce Gray designed in 2012, yielding the smoothest DA pull possible.
Description
You’ve seen photos of Bruce’s hand-finished, custom hammers for P-Series SIG pistols. Customers who sent in their guns for in-house builds could order one of the hundreds made of the original design. Grayguns is now thrilled to add these premium hammers to our list of upgrade components for the SIG Classic DA/SA series of pistols.
A rowel hammer (a.k.a. ring hammer) has been incorporated into the design to complement a Modern Classic theme.
Our top-tier manufacturing process draws upon the best techniques learned from our fifty years of technical expertise in modern manufacturing and traditional gunsmithing. Like everything we make for you, it is guaranteed for life.
You won’t fear a tight DA first shot again.
P-Series Modern Classic Commander Hammer Features
- Advanced geometry for the smoothest double-action pull with no stacking
- A very clean single-action break
- Made from indestructible tool steel with a verified optimal heat treatment
- Perfectly machined, hand-honed and finished in Diamond-Like Carbon (DLC)
- Guaranteed for life
- It looks fantastic!
P-Series Hammer Fit Guide
The Grayguns SIG Sauer P-Series Modern Classic Commander Hammer is fully compatible with SIG P-Series DA/SA pistols.
- P226
- P226 X-Five
- P228
- P229
- P220
- P225
- P225-A1
- P6
- P245
- P224
- P227
- M11-A1
Although you can install our Modern Classic Hammer independently, the hammer does work perfectly with our premium action upgrade parts.
- Grayguns Short Reset Trigger Kit
- SIG Enhanced Leverage System
- SIG P-Series Custom Strut System
- P-Series Dual Adjustable Curved Trigger
- SIG P-Series Dual Adjustable Straight Trigger
Compatible with Grayguns’ Hogue grip panels, guide rods and Master Spring Set.
Our DA/SA SIG pistols upgrade action components are appropriate for duty use unless you install one of our competition sears from our SRT kit. (The competition cut sears are no longer available.)
This hammer is incompatible with the P239, Browning BDA P220 or P-Series pistols with SAO or DAK triggers.
Additional information
| Weight | N/A |
|---|---|
| Package Dimensions | N/A |
| Finish | Black DLC |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
Disclaimer
Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.
Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.
Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.
Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.
eveningcop20 (verified owner) –
The Modern Classic Hammer was another fantastic upgrade from Grayguns. I installed this and a the flat trigger in my Sig P229 Legion in 357sig. I had previously installed the Sig P series Strut System.
The trigger is butter smooth, no stacking. The short reset is nothing short of phenomenal.
I also have to give a great review on the Sig P239 hammer spring I previously purchased. The only place I could find one.
The quality Grayguns parts added to an already great pistol, and made it even better.
I’m now looking forward to doing the same to my Sig P220 Elite.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
hdinter3 (verified owner) –
Perfect hammer for anyone considering carrying their P-series Sig, or who is looking for an upgrade to the stock part. The finish is excellent, and the overall design is truly a modern remake of a classic.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
ozzie80 (verified owner) –
After adding your enhanced Trigger and Trigger bar plus the heavy recoil rod and spring the Hammer was just another ideal piece for this 226. I loved the performance derived from using your parts and the pistol is a pleasure to shoot.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jlmac (verified owner) –
Beautifully machined and finished, this DA/SA hammer will enhance the function of any classic P-Series trigger. It’s even better when installed with Grayguns’ custom strut system and their short reset sear. Installed together, these parts result in superb trigger action. And, just to pile on to other commenters here, the skeleton rowel spur design looks downright terrific, lending a custom appearance to any pistol. Seen here on a P220-5 10mm Auto.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Steven Millhouse (verified owner) –
Replaced factory P229 hammer with this. I also upgraded the struts and springs at the same time so I can’t isolate performance improvements. What I can say is I appendix carry and this hammer is way more comfortable to cancel compared to the factory.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
johnfmerrick (verified owner) –
All my SIGs have a variety of GG components but I have one favorite P229 in 357 SIG that had everything except the GG hammer. I installed it yesterday. I took before and after readings using NRA weights for the SA and a pull gauge for the DA. The installation of the GG hammer took off .5 lb from the DA (it went from 10 to 9.5) and .25 lb off the SA (it went from 3.5 to 3.25). The DA was slightly smoother and also seemed a tad shorter but that could have been my imagination. The gun was great the way it was, so was the extra $124 worth the small gain? Well, it’s that effort and money put out to get an A+ result rather than an A. So if getting the best action job possible is important to you this hammer is worth the money. And it looks great!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Randy Johnson (verified owner) –
I recently converted my P226 Nitron to a “Legion” by replacing the grips with Hogue Legion grips, low profile controls and a short reset trigger. This hammer was just what I needed to create a unique look. On the practical side I find it easier to thumb the hammer due to the unique geometry of the ring. I’m extremely happy with my purchase.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
donald.wm.parker (verified owner) –
I installed this on a P220R that I had previously sent to GG for the ELS trigger installation (which is nothing short of awesome), and I couldn’t be more pleased – and I definitely learned many lessons regarding Sig hammer fired disassembly/reassembly… I’ve only been able to function check with snap caps, and heading out to verify performance this weekend. Now, if GG would make a version of this hammer for my SAO Legions…
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
jondittman (verified owner) –
Hammer arrived promptly, fit perfectly, functions flawlessly. SIG P220, Made in W. Germany Date stamped 1994, .45acp
I am using it with a SIG Short Reset Kit and a GrayGuns Fat Strut Kit, and I am using the 19lb. hammer spring.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
brianfortier413 (verified owner) –
As with everything I’ve ever order from GG, this hammer perfectly designed to for my P226 and improved not only the look but the functionality of my pistol. DA feels cleaner on the pull.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
John Telford (verified owner) –
This hammer is exactly what a classic Sig pistol needs. The ergonomics on it are excellent and it improves both single and double action pull. The double action is especially smooth and I expect an increase in first shot accuracy because of it. The only fitting required for my installation in a Sig P220 was to stone the side of the hammer strut so that it moves freely in the hammer slot. Quality, fit, and finish are excellent. I plan to put one on my P226 next..
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal