SIG P-Series Master Spring Set – P226, P229, P220
$16.00
The Grayguns P-Series Master Spring Set is compatible with various SIG Sauer® P-Series pistols. Designed for your P220, P226, P229 and many variants. See the Fit Guide below.
Includes a 17-pound spring (red) and a 19-pound spring (blue).
Description
Our Master Spring Set includes our 17X and 19X mainsprings and our competition sear spring.
Master Spring Kit Fit Guide
The kit is compatible with the following modern DA/SA SIG SAUER P-Series pistols:
- P220
- P224
- P225A1
- P226
- P227
- P228
- P229
- P226 X-Five Allround
The mainsprings provided are designed for the modern E2 compatible strut and seats or our P-Series Fat Custom Strut System. The springs will not fit the old-style strut and seats.
Additional information
| Weight | 0.0625 lbs |
|---|---|
| Package Dimensions | 6 × 4 × 1 in |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
Disclaimer
Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.
Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.
Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.
Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.
trapperjohn1975 (verified owner) –
had the blue spring, Grayguns dual adjustable flat trigger, and Sigs SRT kit installed in my P220 and what a difference it made. love the trigger. should of done it soonet
(0) (0) Watch Unwatch
bluesjuke (verified owner) –
Kept looking at this kit but hesitated but now that it is installed I am overjoyed with it and the results are amazing.
Have a 229 Select that had a slightly heavier than average pull compared to the many other Sigs I own and have owned.
Installed the sear spring and 19 lb mainspring and with the factory short reset trigger already in it from the factory it is comparable to my Legions.
DA is very noticeably reduced and I notice the change on SA as well.
In addition to the reduced trigger pull the DA pull is not only lighter but very smooth from start to finish of pull.
Installation was a breeze and quick.
If you are looking to do this to your Sig don’t wait- it is worth the time and money.
(0) (0) Watch Unwatch
ericcurtis (verified owner) –
My da feels better with the new spring. East install
(1) (0) Watch Unwatch
Patrick Vernon (verified owner) –
Installed 19# and sear spring in my 229 Legion in about 5 minutes. Was a very easy install with a noticeable difference in DA trigger pull. Quick delivery and worth the $16. Had no light strikes since install .
(0) (0) Watch Unwatch
antonio_aguiniga (verified owner) –
Makes a great back up spring set for classic P-Series SIGS.
(0) (0) Watch Unwatch
henckelrobert (verified owner) –
I ordered the P Series Master Spring Kit for my 229 E2. My pistol already had the Short Reset Trigger and the internal SRT parts. I installed the 19 lb. spring as recommended for a carry gun and the sear spring. The kit dropped my double action and single action trigger pulls by about 2 1/2 lbs. respectively. Very pleased with the results and quality of the product and service.
(0) (0) Watch Unwatch
sten25 (verified owner) –
I ordered two of these sets, placing the 19 pound spring in my P228, and a 17 pound spring in my P226.
After verifying operation at the range for both guns, I found that neither spring affected the amazing reliability of each pistol.
In fact, my trigger work in the P226 was so notably improved, that after a few months, the P228 was moved to the red spring as well.
For the money, one of the best improvements I’ve made on my Sig pistols (next to the Gray Guns adjustable triggers).
(0) (0) Watch Unwatch
Chris Twitchell (verified owner) –
I was able to accomplish the trigger adjustments I was looking for. After testing multiple springs, I landed on the red spring (17lb spring) and averaged 8lbs. DA. For SA, I averaged just over 2lbs. Installation was not too difficult. There are many installation videos out there to assist if needed. Definitely make sure you either know how to install the spring kit, watch installation videos in advance or have your gunsmith install the kit. If you’re new to working on Sig’s, the install can be a bit tricky and the reassembly can be more tricky if you don’t disassemble properly. Overall, I’m very pleased with the kit and Gray Guns. They make it easy! I would definitely recommend this spring kit.
(0) (0) Watch Unwatch