SIG Enhanced Leverage System – P226, P229 & P228

(65 customer reviews)

$185.00

Our P-Series Enhanced Leverage System (ELS) is designed explicitly for SIG Sauer Classic P-Series DA/SA or DAO pistols (not DAK). Fits the P226, P229 and P228. See below for details, including compatibility for the P220 and P227.

The ELS reduces DA and SA pull weights with dramatically improved pull characteristics.

It consists of our Curved, Straight or Hybrid Trigger – with dual adjustability for over-travel and pre-travel – mated to an enhanced, Custom-Designed Trigger Bar.

Before ordering, read the full description below and check out our P-Series companion products!

The system is compatible with both DAK-compatible and non-DAK-compatible FRAMES. Read the full description so you avoid ordering the incorrect version.
SKU: N/A Categories: , Tags: , ,

Description

The Enhanced Leverage System (ELS) – with options for a Curved, Straight or Hybrid Trigger – features dual adjustability for over-travel and pre-travel. The trigger kit reduces double-action and single-action pull weights. You will experience dramatically improved pull characteristics without changing springs or spring weight.

This system consists of our proprietary trigger options with enhanced geometry features mated to a custom-designed trigger bar. In addition, multiple drop-in options are available to tune your action for your specific requirements.

The ELS is not designed to reduce trigger reset, as different components are involved.

Enhanced Leverage System Fit Guide

You or a qualified armorer can install the Enhanced Leverage System Straight Optimized Trigger as a drop-in kit. The ELS will fit the classic P-series SIG Sauer DA/SA or DAO pistols, including:

  • P226
  • P229
  • P228

In-House Installation for P220 and P227

Do you have a DA/SA or DAO P220 or P227? We can install the ELS as an in-house service. Click here to get started.

It will not work with DAK trigger systems. The DAK references above are specific to the window frame cut, not the DAK trigger system.

System Compatibility

The ELS can only be purchased as a complete system and requires the trigger and trigger bar to function. The trigger bar is incompatible with our stand-alone P-Series Dual Adjustable Straight or Curved Triggers. 

The trigger may not be fully compatible with California-compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

Finishes

Black Oxide – The standard finish for this product is our high-quality blued finish.

Nickel PTFE – Electroless Nickel PTFE (Teflon®) is an advanced, self-lubricating, composite coating with PTFE particles co-deposited in the electroless nickel layer. Provides a hard, uniform, self-lubricating coating for our premium aftermarket triggers.

Enhanced Leverage System Technical Specifications

SIG P-Series DAK window frame cutThe Grayguns proprietary enhanced leverage geometry reduces pull weight by approximately 25 percent without compromising reliability or factory safety values.

We micro-polish each enhanced-geometry trigger bar for superior smoothness and perfectly timed function.

Engineered to provide several key benefits:

  • Reduces the pull weight of double and single action without spring replacements.
  • Adjustable over-travel screw to fine-tune and reduce over-travel
  • Adjustable pre-travel screw to fine-tune and reduce pre-travel
  • Maintains all factory safety functions.

Grayguns uses precision-cut heat-treated tool steel, and the kit is 100 percent American-made. We hand-finished each part to ensure the quality you have come to expect from Grayguns.

Companion Products

Enhanced Leverage System pistol frameImportant Version Information

Due to different window frame cuts, you must inspect the frame of your P226, P229, or P228 DA/SA pistol to determine which version to order.

  • P226, P229, and P228 pistols with DAK-compatible frame window cut
  • P226, P229, and P228 pistols with non-DAK compatible frame window cut

Installation Video

Additional information

Weight N/A
Package Dimensions N/A
Version

Straight Trigger (DAK Compatible), Straight Trigger (Non-DAK Compatible), Straight Trigger (DAK Compatible) Nickel, Straight Trigger (Non-DAK Compatible) Nickel, Hybrid Trigger (DAK Compatible), Hybrid Trigger (Non-DAK Compatible), Hybrid Trigger (DAK Compatible) Nickel, Hybrid Trigger (Non-DAK Compatible) Nickel, P220, Curved Trigger (DAK Compatible), Curved Trigger (Non-DAK Compatible), Curved Trigger (DAK Compatible) Nickel, Curved Trigger (Non-DAK Compatible) Nickel

Share your thoughts!

4.89 out of 5 stars

65 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. Michael Garcia

    Excellence improved

    Michael Garcia (verified owner)

    So a humble opinion of mine is that the SIG P226 is one of the best firearms ever invented, and the Grayguns ELS makes it even better. I have an RXP Legion DA/SA, and I opted for the Grayguns straight trigger.. The result is a lighter and smoother DA pull, and an SA trigger break that is more precise than some SIG SAOs I’ve dry fired at the gun stores. It rivals some pretty good 1911s. Even my left handed shots were good. The installation video was very helpful and the whole operation took about 30 minutes, not counting a grip screw issue. One of the most satisfying purchases I’ve made. Next stop—the hammer strut and springs. Also, a special thanks to Kim for his helpful expertise in the chat.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. TRCJR

    As advertised

    TRCJR (verified owner)

    Simple install, big improvements. I went with the Hybrid trigger for my DA/SA 226 and 229 and this system was everything I hoped it would be. Very satisfied with the purchase and GrayGuns as a company overall.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. dobbr62

    Everything I hoped for

    dobbr62 (verified owner)

    Installed the ELS with flat trigger and #17 spring. This gun has taken over my #1 spot over my 1911. I am now spoiled and considering having my 1911 trigger redone because my Da/sa sig puts it to shame.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. joshberrong

    A must have

    joshberrong (verified owner)

    Put the ELS in my M11a1 and made a huge difference. Well worth it!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Luis Rivera

    Very happy

    Luis Rivera (verified owner)

    I installed the ELS along with the Custom strut system. I couldn’t be happier. I started with and average of 10# 9.7 oz DA pull, and 4# 3.1 oz SA pull. After install I have a 7# 12.2 oz DA pull and a 2# 6.9 oz SA pull. Easy install and makes it a high speed, comfortable pistol.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. lipscombm52

    An Absolute Must

    lipscombm52 (verified owner)

    Got the Hybrid for my M11-A1 and it is night and day difference on trigger action. This eliminated all the slop. No more pre or over travel. Very clean, crisp, and comfortable trigger now. Worth every bit!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. bakerdavel

    P226 with a better trigger than a Shadow 2? It’s possible

    bakerdavel (verified owner)

    Is it worth it? Well, I didn’t stop with just the ELS for my police surplus P226. I added the superstrut and SRT as well. Some hefty cash. However, I finally have the trigger I want in my Sig. With the hybrid installed, I have a trigger that meets or exceeds my Shadow 2. The trigger is precise and exceedingly smooth throughout the stroke. The DA is approximately 5 1/2 pounds, the SA around 2 1/2. (This is with the red 17-pound mainspring and sear spring installed with the superstrut kit.) Way better than a Legion.

    Installation was easy and helped build my confidence in working on my gun. Just ran into one bump: I kept trying to adjust the pretravel in SA, but the adjustable trigger that comes with the ELS only adjusts for pretravel in double-action. To clean up the mush in single action, you need to get the SRT kit. (SRT installation tip: Use a pencil magnet to hold the sear in place to align the hole for the pin.) Getting the right tools – like a screwdriver with a notched tip to release/engage the sear spring – makes installation of parts much simpler. (While this isn’t shown in the installation video, I liberally applied TW25B grease on all metal-on-metal contact points.) I only have 150 rounds through the pistol since all the upgrades. No issues whatsoever. The gun is just a pleasure to shoot.

    So is the ELS worth it? Yes, despite the high cost, if you go the full Monty and add the superstrut and SRT. You owe it to yourself to trick out at least one of your Sigs to see for yourself.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. One person found this helpful
    David Joseph

    Wow what a difference!

    David Joseph (verified owner)

    Very easy install on a Legion P226 DA/SA. I watched the video and followed along. It only took me 15 minutes to install and adjust. I’m 67 with arthritis in my hands, it made a world of difference! I also installed the the custom Strut system along with the ELS adjustable trigger. I used the 19 lb. spring.
    Man that thing is as smooth as a baby’s ass! I attached a photo of the first two mags after installation. Not bad for an old guy… Zeroed RDS at 15 yards, this is free hand, I still struggle a little DA and may put the 17lb. spring in the main strut. My two bad flyers (down and to the left) are from DA.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. wholey45colt

    Great service even better assembly

    wholey45colt (verified owner)

    SIG P226 DAO 9mm
    Great communication from everyone that responded even called.
    I’m telling guys at gun ranges about this system… I come from government 45 colt.. my stock trigger i could not for the life of me fire this gun accurately, with this system trigger and strut.. i finally fired it, all dirty as get out.. around 400 rounds, not one hiccup accuracy was awesome with this system.. heavy spring installed and was shooting 8″ steel at 50 yards.. iron sights… then next day was even rapid firing from 15 yards to 40 yards… I AMLOST SOLD THIS GUN UNTIL I SHOT WITH THE NEW SYSTEM…. now you cant pull this away from me!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. elijahsisney

    Unbelievable

    elijahsisney (verified owner)

    I bought my P226 MK25 sometime in January of 2016. Awesome piece of machinery but if we are all be honest the factory trigger in these firearms are pretty terrible. They have a bunch of pre travel, over travel, and the reset takes about 3 minutes to get to. Awful. I still love this firearm and this kit from Gray Guns makes this P226 feel like an entirely different gun. I wish I possessed the vocabulary to express how amazing this trigger is. Personally I bought the Enhanced Leverage System with the flat trigger, P Series Custom Strut System, Short Reset Trigger, and the G10 Hogue grips. The parts themselves are incredibly smooth, you’ll feel the difference at the range it feels like legit butter. It was a bit annoying to install because how polished these parts are but hey it’s a fair trade. Since this kit is adjustable I have zero pre travel, zero over travel, and the reset feels like I’m clicking a mouse to a computer. Again this kit has completely changed my baby. The factory grips are nice but these G10 Hogue grips are seriously worth it. Same bulk but as factory but flat on the sides instead of rounded. The texture is strong but also nice on the body when appendix carrying. They also look bad ass. So, if you were like me and kind of on the fence of do you do it or not. The answer is yes. Do it for the gun and yourself, you will never regret it. Insane.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. kmckeigue

    Awesome enhancement

    kmckeigue (verified owner)

    The ELS and custom strut are awesome and made a huge difference for me. The ELS was back-ordered and the updates were timely and much appreciated. Positive impact on my comfort and results at the range with the 229. The 365 needs a little love so will be ordering for that model.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Terry W

    229 enhanced leverage system

    Terry W (verified owner)

    Ordered the Enhanced Leverage System as well as custom strut. This combo really transformed the p229. Shipping and communication were fantastic. Will be back to order more SiG parts. Definitely recommend GrayGuns.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Brian Callaghan

    226 enhanced leverage system

    Brian Callaghan (verified owner)

    Took awhile to get installed but i am very happy with mh new trigger thanks

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. patrick.ryan

    Pre Travel on my P226 Legion was more than I could take.

    patrick.ryan (verified owner)

    Installed and adjusted ELS and everything is flawless. Highly recommend GrayGuns for all aftermarket Sig parts.
    If you made a skeleton hammer for the P226, I would buy that as well.

    Anxiously awaiting the grips to be back in stock.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. One person found this helpful
    markhanus

    Wonderful improvement

    markhanus (verified owner)

    I ordered the Enhanced Lever System with the hybrid trigger, in combination with the Short Reset Trigger kit and the Custom Strut System. Installation was just as described in the YouTube video. I was never dismayed with the stock SIG trigger, but that was only because I didn’t know how much better the Gray Guns system was. The combination of these takes the pistol to another level, smooth, crisp, and perfectly adjusted. On my pistol, the stock double-action pull was 9.7 # and the single-action pull was 3.9 #. After installation of the enhanced lever system and the strut system the double-action pull is now 7.3 # and the single-action pull is 2 # (Lyman scale, average of 5 pulls). On my second trip to the range, I reduced my Bill Drill time (uncased from the table) from 3.8 sec to 3.0 sec. at 15 yds.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. apszr1

    ELS for my Sig P226

    apszr1 (verified owner)

    Just got the ELS with the hybred trigger as part of my rework on a fire damaged P226.. it took me a few attemps at reowking after many years of inactivitybutit worked very well. Ran a hundred rounds through it without a fail. The trigger adjustment and trigger bar did wonders for the action.
    May need to tinker more in the future . Grayguns will be my first choice.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. whulik

    Best P2xx trigger

    whulik (verified owner)

    I have the GG ELS straight trigger in my 226, 229 and GG just installed it in my 220 (you did an awesome job)

    The trigger has as little take up as is possible, pulls smooth and clean and has absolutely zero over travel. Makes shooting a pleasure

    All my Sig P2xx guns also have the GG short reset, their strut and mainspring and the heavy guide rod. I guess they are as much GG as they are Sig at this point
    .
    Could not be happier with all of your products and your gunsmithing services

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. One person found this helpful
    Hugh Tsung

    Beware! Hybrid trigger will damage your finish!

    Hugh Tsung (verified owner)

    I bought two of these. One with the straight trigger, one with the hybrid trigger. There is definitely an improvement in trigger pull. But the hybrid one will hit the frame and wear out the finish quickly. The straight one is fine.

    [Please see our reply here.]

    Upvote if this was helpful (0) Downvote if this was not helpful (1) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • One person found this helpful
      Grayguns Customer Service Team

      Grayguns Customer Service Team

      UPDATE: We heard back from Hugh the day after his review, and he noted, “Upon examining, I just realized that even though none are DAK models, one of them has the DAK cutout which could be the issue.”

      As noted in our product description, it is important to check your frame to see if you have a DAK or non-DAK compatible frame. Almost certainly, the issue was ordering the non-DAK kit and installing it in a DAK frame.

      We are waiting to hear back from the customer as of May 12.

      Original reply…
      Hugh, This is not at all typical for the hybrid trigger. Have you contacted our customer support team in Oregon? If not, please reach out to them here.

      Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. spd6

    Top Quality

    spd6 (verified owner)

    Another top quality part from Grayguns. Fit great and functions much smoother then oem. I highly recommend

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. robertedeleon72

    robertedeleon72 (verified owner)

    Easy installation and work better than i expected

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Michael

    Significant improvement

    Michael (verified owner)

    I have installed several of these and intend to install them in the remainder of my P-series classic Sigs. The first of them to receive the ELS trigger was a stock run of the mill P229, which received the ELS, a fat guide rod, the SRT package, and the hammer strut. A little Lucas grease as appropriate. I may as well have had a different pistol in my hand. Night and day difference. Short stroke, smooth, extremely short reset. I was concerned about the angle of the flat trigger, and that it might sit too far forward. It is just right, no more forward than factory, with an easy, smooth press. The dual adjustment has no overtravel, and no play in the trigger when full forward for the double action pull. Trigger movement equates to immediate hammer movement. When I first pressed the trigger, I was surprised at the hammer release; the hammer cocked back faster and released sooner than anticipated; the feel is a short double action stroke, crisp break, and very short single=action reset and trigger press. I installed the 19 lb hammer spring. I ended up putting the ELS in my legion, with more to install shortly; it’s a noticeable improvement in the legion, too. Compared side by side to an unmodified pistol, one in each hand, the difference is best described as striking. I recommend the ELS, and the other components for anyone serious about their pistol.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  22. Leslie Oglesby

    Awesome

    Leslie Oglesby (verified owner)

    SIG ELS system is awesome, I fitted it along with the SIG SRT and Strut for P226. These three items go together they transformed my P226. What a difference they make to an already great pistol, the fit, and finish is second to none!
    I highly recommend. these items.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  23. jbwjbw

    Nice.

    jbwjbw (verified owner)

    I used to do a lot of my own polishing and stoning – this is as close as I have found off the shelf. Combined with the strut system, I saved a lot of hours.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  24. kurt-7143

    GREAT CUSTOMER SERVICE AND PARTS!!!

    kurt-7143 (verified owner)

    ***UPDATE*** the original trigger bar spring seemed to have more bend in it, so I swapped it out with a new Sig trigger bar spring which was very different. Everything is working smoothly. Also, installed the SRT, ELS and Strut Kit on a P226. Thank you to all the staff for the GREAT customer service and support, you guys are GREAT!!!

    Installed the ELS on a P229 Enhanced Elite. Running into an issue with the trigger bar spring and grips. Everything runs great with the grips off, however when I install the grips, they seem to put pressure on the spring causing it to slip and lose tension. I’ve tried putting both the “stock” Sig Sauer polymer grips and a pair of Hogue G10 grips, but get the same issue. The spring appears to protrude out more and does not lay flat along the trigger bar. When I loosen the screws on the grips you can see the trigger reset when it fails….any suggestions for correcting? Would rate 5 stars once I can get this resolved and operational.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  25. Brad Whiting

    226 Elite

    Brad Whiting (verified owner)

    This was a great upgrade. Also added the strut. Between the two it’s like shooting a new gun. The video was perfect.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  26. Phillip Hess

    P229 Pro

    Phillip Hess (verified owner)

    Installed the enhanced leverage/hybrid trigger along with 17# hammer spring and competiin sear. Great adjustment on trigger. Ended up with a very smooth 6lb double action and 2.5lb single action. Very nice, easy install.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  27. Tino

    Great Upgrade

    Tino (verified owner)

    This is the second set I’ve installed on P226 and both are significant improvements on DA trigger pull. As stated the crunch on DA is gone. I would rate it close to a Colt Python double action pull in relation. All products have been great. Thank you Grayguns staff.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  28. coreycollins

    Great improvement to DA/SA Legion...

    coreycollins (verified owner)

    Thank you for a great kit- Easy to install. Be careful on the pre- post travel adjustment since it can easily lock out DA reset. Video is excellent. With a bit of tuning my springs, I got DA to #4.5 and SA too #2- perfect for IDPA SSP/ USPSA Production for me! Hammer strut kit on the way since I forgot about the dumb plastic seat…

    Thx GG!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  29. William Frew

    William Frew (verified owner)

    I installed this upgrade on my 226. I looked at this for some time. I watched the video on here. I almost looked too easy. I installed and adjusted it without any problem. I took it to the range the next day and I’m very happy with it. It makes a world of difference. I might have to install one on my 229.
    Thanks. Bill Frew

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  30. fpaar

    Once again

    fpaar (verified owner)

    Again very happy with the transaction. Fast delivery, parts top of the line and installation easy. Not surprised GravGuns has been responsible for all parts I have purchased to hotrod my P229. Have had questions with some installation and the staff had the answer. Again pleasant doing business with!!! Thanks Guys. Now I have to find some serious range time.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  31. One person found this helpful
    jose-2069

    ELS Hybris, Strut System and SRS

    jose-2069 (verified owner)

    I’m beyond amazed at the difference all 3 of these GGI products made. I kept testing over and over to keep consistent trigger pull weights.

    Before
    DA- 10lb 4.0oz
    SA- 5lb 6.3oz

    After Upgrades
    DA- 6lb 14.2oz
    SA- 2lb 15.3oz

    Truly amazing and great product.

    Also would like to add Chris Sweeten was amazing when I had received the wrong ELS bar because I was told my P226 was a DAK frame, but in reality never was. He made my experience that much better. Thanks Chris for shipping out the new bar as fast as you did!

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  32. James Ladd

    Els curved

    James Ladd (verified owner)

    Smooth…! Clean drop in install and butter smooth. Worth the wait. My old German frame is now a sleeper by general appearance..

    Old gun, new guts, still doing the 10 ring thing.

    226 DASA-stainless slide, SRT, ELS-Curved, Superstrut-E2, 17 lbs mainspring, and purple competition sear spring and pink p+ recoil spring. Militech- synthetic lube and tw25 grease. The only thing that gives it away is the solid stainless steel guide rod.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  33. jcoat007

    Awesome Product

    jcoat007 (verified owner)

    I upgraded a p229 with the Grayguns Custom Strut, ELS, SRT kit, Fat guide rod and dual-adjustable straight trigger. It made a night and day difference. It transformed a nice gun into a stellar gun!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  34. nserafini

    Well worth it!

    nserafini (verified owner)

    First, super easy to install. There’s a Gray Guns video online now that walks you thru the process, and it’s super smooth. The adjustability of the trigger is crazy good. Second, it shipped super fast. I ordered Monday, and it was on the extreme East Coast by Wednesday. Had it installed Thursday and went shooting Friday.

    Combined with their strut and spring kit my P226 has become a new firearm; crisp breaks, no trigger slop, and an overall great feel. DO IT!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  35. David Pierce

    Amazing!

    David Pierce (verified owner)

    I have been considering getting this trigger for a couple years now and finally decided to get it. Best decision ever!! I bought the nickel flat trigger and also got the spring kit as well since it’s only about 16$. I started with 12+ DA and 4-1/4# SA trigger pull weight. First I installed the spring kit and it dropped it to 7-1/2# DA and 3-1/2# SA. Next I installed the ELS trigger and it dropped to 5-1/2# DA and 2-1/2# SA. My p229 stainless elite shoots like an absolute dream now. Highly recommend.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  36. Sean Azpeitia

    So glad I found this site

    Sean Azpeitia (verified owner)

    This really changed the trigger pull on my P226 from “pretty good” to “excellent”. The difference is noticeable in both smoothness and lowering the pull strength. Super easy to perform the swap. If you are the fence about the necessity of this, just do it.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  37. One person found this helpful
    Tom DiSarlo

    Great upgrade for my P229 Classic Carry Elite

    Tom DiSarlo (verified owner)

    The ELS transformed my P229’s unsatisfying trigger pull into a thing of beauty. Between the smoothness of the pull and the reduction in both DA and SA weights, it’s delightful. The pre-travel and over-travel adjustments are spectacular as well. It’s a pricey upgrade but one I consider money well-spent.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  38. One person found this helpful
    jclaybackus79

    Very Nice

    jclaybackus79 (verified owner)

    I have loved my P226 SAO Legion since I first pulled the trigger. I wound up picking up a P229, and after deliberation, decided I wanted DA/SA and no ceracote for regular carry. I went with a 229 Equinox. (Side Note: I didn’t care for the looks of the Equinox slide up on purchase, so it got a black Pro Cut slide and a Bar-Sto SS fluted barrel – very nice looking pistol now.) I won’t lie though, I just couldn’t shoot the pistol like the 226 SAO or my other striker fired pistols – and I’m not only talking about the DA trigger pull, even my SA shooting was below my personal threshold of acceptability for a carry pistol. Very frustrating considering my love and luck shooting the P226 SAO, and considering my investment to date in the P229…..

    So, in comes Gray Guns. The ELS (flat trigger), plus fat strut, has transformed my ability to shoot this pistol significantly. My DA accuracy is now on par with what my SA accuracy was – not great, but quite respectable. And, my SA accuracy is on par with my p226 SAO shooting.

    The DA trigger pull is long, but smooth. I have long fingers, so no problem here, though others may feel differently. The SA trigger pull is exquisite for a DA/SA pistol in my opinion. Honestly, I am thinking that it is the flat trigger which has impacted my SA experience more than anything; pre- and over travel are dialed in near-perfectly and all of my other pistols have flat or near flat triggers, so getting away from the significant radius of the stock trigger must add up to what I needed. Once I have put another few hundred rounds down range without any hiccups, my P229 will definitely go into carry status, right where it was always meant to be.

    And, then there is Gray Guns! Wow, good folks, pleasant to deal with, quick shipping and good install videos. I am pleased to give them my business.

    So why 4 stars? It’s a bit pricey for what you get – the margin must be huge! But, R&D has costs. And, quality has costs. And, exclusivity has costs. And, I will spend the money again if I find myself in a similar situation. So, there’s my 2 cents on that.

    I will say to anyone with an Equinox, be advise that this nickel finish is a high gloss nickel finish – it does not match the nickel finish of the Equinox line. Nor does it clash – I was worried I would not like the looks of it. So, I said to myself, good thing (my) pistols aren’t about looks! Then, I installed it and found that it looks great – no problems at all with my opinion of the looks – I love it. Having the stainless Bar-Sto barrel peaking through the Pro Cut slide, the gloss nickel trigger and the flat nickel controls works quite well in my eyes, and those of everyone who has seen it.

    Thanks Bruce and Team

    Upvote if this was helpful (0) Downvote if this was not helpful (1) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  39. CHRISTOPHER WILSON

    Great with the SRT

    CHRISTOPHER WILSON (verified owner)

    Trigger is smooth and much lighter. But the reset is super long and actually worse than the factory trigger. Installed by a gunsmith i trust. Just not really impressed, especially for the cost.

    Edit: after adding the short reset, this is a new gun. The trigger feels amazing, break is crisp. Highly recommended!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • One person found this helpful
      Grayguns Customer Service Team

      Grayguns Customer Service Team

      Thank you for taking the time to update your review! We’re glad we got you the trigger pull experience you wanted.

      Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • 2 out of 2 people found this helpful
      Grayguns Customer Service Team

      Grayguns Customer Service Team

      [From Keith Hosey] I’m sorry that you were not impressed with the ELS kit. We guarantee all of our parts and will work hard to change your mind on this kit. We have reached out to you via email.

      There might be some confusion with the parts installed. This kit does not reduce reset. This kit reduces the DA and SA pull weight. We achieved this by changing leverage points.

      The short reset is achieved by swapping the sear with a short reset sear. We do sell our SRT Kit for that modification. (SIG Sauer also sells an SRT.)

      These drop-in components, when paired, will give you the lightest, crispiest, and shortest resetting trigger possible. As noted, we’ve reached out via email and will work to ensure you get the trigger upgrade you’re looking for.

      Upvote if this was helpful (2) Downvote if this was not helpful (0) Flag for removal

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  40. One person found this helpful
    gamarrett

    Legion P229 9mm up grade

    gamarrett (verified owner)

    I purchased a P229 9mm Legion RXP. I am a man of 72 years with four surgeries on my right arm and loss of half my bicep muscle. I felt that these upgrades were essential for me on my new purchase. Gray Guns delivered after the ELS along with the Fat Strut with the 17 pound spring ended up with a 6.5#DA and a 2.75#SA. I wanted to stay with Gray Guns up grades because Sig Sauer trusts them enough to have put the SRT trigger system in the Legion line of guns. First time to the range fired over 300 rounds and could have shot more. Thank you for the great up grades smooth trigger pull. I want to add that I had ordered the wrong ELS and they exchange the right trigger bar for me. Thanks again.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  41. david.sohns

    Easily the best upgrade out there

    david.sohns (verified owner)

    Ever since I discovered the P226 it has been my absolute favorite hand gun. I now have several and, other than a couple of vintage collector models every 226 in my safe has the ELS system. The smooth slick action coupled with the enhanced geometry and travel adjustment make an awesome gun super awesome. If you include the SRT system as well, you will have a top shelf shooter that rivals the best ones out there.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  42. reganedalgo

    Buy it today…you won’t regret it!

    reganedalgo (verified owner)

    Absolutely fantastic trigger. The recent installation video on GrayGuns YouTube helped immensely. Had no idea how much this would help my MK25, but lord have mercy it’s a better trigger than my Kimbers have now. Extremely short reset, smooth double action pulls and the crispiest of single action breaks makes this trigger the best on the market. Would recommend to any P226 owner!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  43. golf007sd

    Simply put...a must have.

    golf007sd (verified owner)

    The installation was easy. for the most part….hence, only challenge I had was that the triggers adjustable screw had a good amount to lock tight put on them; thus I had spend some time loosening them up before full installation and ajustments. That aside, the feel is awesome. However, you will be doing yourself injustice if you do not get their STR as well. The two….a Home Run!
    Grayguns comment: Apologies, as we have inadvertently deleted the photo of your P229.

    Photo has been removed

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  44. betesme

    ELS equals smooth

    betesme (verified owner)

    I now have 3 P seies SIGS with the ELS installed. The trigger pull is much smoother, feels lighter, though I don’t know why, I run 19lb springs to ensure reliable ignition. The hybrid trigger suits me very well, and the overall effect is remarkable. I know it’s not inexpensive but if you include the P Series Fat Custom Strut System, you will have a gun that feels like a full house trigger job has been done on it, without compromising reliability. These systems are well designed, well manufactured and well worth the price.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  45. christian.ardito

    Near zero reset

    christian.ardito (verified owner)

    Fantastic upgrade. I’ve had my Sig Sauer P226 DA/SA Legion for a few years and wanted a flat trigger. When I learned the original trigger on my Legion was from GRAYGUNS, The installation of the Sig P-Series ELS with flat trigger was pretty simple. There are YouTube videos showing the process step by step. I love that the trigger is adjustable and the most noticeable difference is the lack of slack on the double action and the almost non-existent reset (it’s that good!). I went to the range with a friend who has the same Sig Sauer P226 DA/SA and we both shot much better with my upgraded pistol vs. his. He had never shot with my pistol, by the way. The groupings were closer and more on target at any distance we tested. Worth every penny!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  46. nick_xc

    nick_xc (verified owner)

    I’ve installed several ELS kits into my P226/P229 SIGs. It’s a real transformation of the gun. Sure, it’s a lighter pull, but the smoothness of the trigger pull is the real impressive change. It allows me to be more accurate, and the weapon is much more responsive. I have my adjustable trigger set to be exactly where I want it, eliminating any unwanted travel. It’s so, so good. This is probably the single best upgrade I’ve ever made to ANY gun.

    I have a few flat trigger versions but this last purchase I opted for the hybrid trigger. I wish I’d have tried it sooner. Ergonomics are perfect for me. While I’ve installed a few of these now, it’s a very straightforward process if you have basic mechanical skills.

    Buy with confidence.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  47. markbrent7777

    As Promised

    markbrent7777 (verified owner)

    Added ELS to my P226 Legion Black and trigger pull weight 2 lbs, then put in 16lbs hammer spring and light sear spring and WOW! Best DA pull ever, it’s worth the money!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  48. One person found this helpful
    Robert Hobart

    Upgrade to P229 .40

    Robert Hobart (verified owner)

    Shipping was next business day and it arrived in three days via USPS.
    I wanted to improve trigger pull and overall performance, so went with the ELS with the Hybrid trigger just for variety. In addition, also added a Short Reset Trigger.
    Took it to a local Sig armorer who did the install in about an hour.
    I like flat triggers, but for a carry pistol I like the effortless index with the Hybrid.
    Trigger pull is notably easier with the ELS and the SA trigger break is….SURPRISE! Without putting a guage on it, I’m pretty sure its at or under 4 lbs. Sweet.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  49. Stephen Collins

    Great trigger

    Stephen Collins (verified owner)

    Put in my Sig p229 elite, went with the flat face ELS trigger, adjustable over/pre travel made the trigger feel great in single or double action.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  50. James Marty

    Enhanced leverage trigger kit.

    James Marty (verified owner)

    There are many things you can purchase on line that are seldom perfect. I purchased the enhanced leverage straight trigger kit for my Sig p226 the installation was very easy. I made the adjustments to the trigger also easy. This is an excellent top quality product and a huge improvement over the stock trigger.. Worth every penny.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  51. Mark Baudoin

    Great Results with P229

    Mark Baudoin (verified owner)

    I installed the Gray Guns SIG P-Series ELS flat trigger and SIG P-Series Fat Custom Strut on my older model P229.

    I had previously installed the Sig SRT kit, but the trigger pull in SA and DA still left a lot to be desired.

    After installing the GG kits, the difference is day and night. I haven’t measured the pull weights but the DA is now as smooth as a Colt Python and the single action is as good as any of my highly modified Glocks.

    I was able to install the items in about 45 minutes after watching a few videos, which fortunately, included information about how to adjust the trigger pre and over travel. It would be useful if GG could include this info in the package.

    As usual, great products from GG.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  52. Ron Sprugasci

    Trigger

    Ron Sprugasci (verified owner)

    Excellent product and service fast delivery

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  53. Jaime Fritsch

    100% recommend

    Jaime Fritsch (verified owner)

    Easy to install. Could use a little more info in the packaging as far as making the adjustments. Whole different gun though as soon as you get it dialed in. Took me about an hour from start to finish doing it in front of a computer looking at youtube videos.

    Sigs should just come with these by default.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  54. One person found this helpful
    LyleHawkyard13

    The little things

    LyleHawkyard13 (verified owner)

    I have now had the opportunity to try out both the straight and hybrid triggers in the ELS. Both are incredible improvements over stock. Even if you aren’t looking to improve trigger functionality this system is an improvement over stock just because of the way it fills the trigger guard. The stock trigger, especially the short reach trigger, has a tendency to want to bite the finger. Not this model, both styles fill the trigger guard so completely that comfort is through the roof.

    Which do you want? Well I’m no expert, I just play one on the internet but it depends which you prefer. For me, the straight trigger was superior for bullseye shooting where you are putting the girl in single action and squeezing off those perfect hits. The hybrid trigger is more, again my opinion, of an action trigger where it just guides your finger to the sweet spot, especially in double action.
    Whichever you choose, buy in confidence that both are phenomenal.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  55. One person found this helpful
    Michael Ham

    Amazing!

    Michael Ham (verified owner)

    So easy to install and what a difference! Stock P226 MK25 DA is brutal. I personally like to leave DA as first shot in defense situation since I want to be 100% sure of my intent instead of hair trigger in SA. With ELS trigger and FAT strut upgrade, DA is just right – not too heavy, not too light and oh so smooth. In SA, this is easily competition grade trigger (assuming you have SRT). BTW, if your locking insert doesn’t fit perfectly straight to the holes in the frame, your pre-travel reduction is too much.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  56. One person found this helpful
    Chris Roush

    Functions and is easy to install

    Chris Roush (verified owner)

    The installation is quite simple. The results are outstanding for not having to visit a gunsmith.

    I have both the ELS and the strut system installed currently. The feel of the trigger has been very noticeably improved. The overall trigger weight has been reduced and the press is much smoother.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  57. One person found this helpful
    Derry Mellott

    SIG P-Series ELS (Enhanced Leverage System) and other Gray Guns kits are AWESOME!

    Derry Mellott (verified owner)

    I installed the Gray Guns SIG P-Series ELS, along with the Grayguns Short Reset Trigger (SRT) Kit and the SIG P-Series Fat Custom Strut System and the Custom Fat Super Black Guide Rod in my non-DAK Sig P-226 [.40 S&W]. I used Sig Factory Springs for the Transfer Bar and Decocker and Recoil Spring, but used Gray Guns Sear Spring and the 17 lb Hammer Spring. First, both SA and DA trigger pulls are now glassy smooth. My DA trigger pull is dramatically reduced to about 11 lbs, per Timney Trigger Pull Gauge, but is so smooth it feels like 6lbs. My SA pull is now 3.75 lbs, per Timney Trigger Pull Gauge, breaks crisply and the Short Reset is right where I want it to be. These Gray Guns parts and kits transformed my P-226 from trigger pulls that just about caused me to “break a sweat” to a pistol that is a dream to shoot! At my shooting range one of the SRO’s I asked to check it out said my pistol has the best trigger pull he’s ever experienced on a SIG pistol. He’s a GLOCK Armorer and was really impressed. I have owned this pistol for several years and always had a “Love/Hate” relationship with it. Shot well, but was a pain to shoot. When I say, “Thank-you, Bruce Gray!” it seems a little inadequate and this effusive review may seem a bit contrived or disingenuous, but I am just a person who found Gray Guns via other articles written about the SIG P-series, took a look and decided to give Gray Guns Products a try. I am astonished and pleased by the results I obtained and wholeheartedly recommend Gray Guns after market products to anyone else. The value is well beyond the price and THAT is a rare thing these days.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  58. 4 out of 4 people found this helpful
    brentwong625

    Gray trigger, Graytter shooting!

    brentwong625 (verified owner)

    Swapped out my Sig P229 (CA compliant) SRT (great trigger but wanted a crisper straight trigger). During dry fire, the Single action wouldn’t sometimes fire or lag fire. (Maybe that was my adjusting or not enough “recoil power”) However during live firing, DA/SA, no miss fires , no problems and follow ups were on point. Trigger pulls were lighter and tighter. Took me about an hr to install. Trigger bar was the trickiest but easy. Big props to Keith on IG for helping select and figure for me out what’s best within the Gray Gun family! Happy shooting!

    Note: When installing ELS to a CA compliant Sig your magazine disconnect safety will no longer work but you don’t need to removed the safety itself to install the ELS.

    Upvote if this was helpful (4) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  59. 2 out of 2 people found this helpful
    George Carpenter

    Transformative.

    George Carpenter (verified owner)

    P226R 40S&W, accurate with the usual crunch/stacky SIG DA trigger. SIG Short Trigger and SRT previously installed.

    Grayguns ELS with Hybrid Trigger was added, along with Grayguns Fat Custom Strut with the Master Spring Set.
    The combination nearly negating the DA pull difference in combat scenarios.

    Being old and old school I went hybrid and I’m glad I did.
    Zero learning curve.
    The change from SIG’s Short Trigger to the Grayguns Hybrid was a non-issue.
    Well worth the money.

    Upvote if this was helpful (2) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  60. 2 out of 4 people found this helpful
    Cary Mckeebe

    ELS

    Cary Mckeebe (verified owner)

    As a certified armorer Prior to installing I did a quick action job. I already had a factory SRT installed. I purchased the kit with a 19lb hammer spring. After installing the kit I can’t say it made a huge difference.. Although I do like the hybrid trigger I don’t feel the trigger bar is worth an extra $90.00. For the cost and mild improvement, I am going to have to give three stars.

    Upvote if this was helpful (2) Downvote if this was not helpful (2) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  61. 3 out of 3 people found this helpful
    RAYMOND

    Hybrid - Great for L/XL hands

    RAYMOND (verified owner)

    I’m a big fan of GGI products. All of my SIGs (P228R, P229, P226NSWG, and P220C) have the original PSAIT single adjustment trigger installed with factory springs. I have run GGI and Wolff reduced power springs in the past and never had a misfire, even down to 17lbs. While the pull is lighter, I prefer the factory weight springs for decreased lock time when shooting at distance.

    The feel of the hybrid trigger face is much better than the SIG factory long, SIG factory short, GGI flat or curved adjustable. I have owned and used each of those in the past.

    The fit and finish are first rate. Thanks for taking the time to make a great product even better. Now if you guys could get to work on the 8mm adj triggers for the older 220, 239, and 228……..that would be awesome.

    Upvote if this was helpful (3) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  62. 5 out of 6 people found this helpful
    cmndrred

    Insane performance from a DIY trigger job!

    cmndrred (verified owner)

    I wanted to improve my Sig P229 .40 S&W so I started with the GrayGuns ELS system to lighten and tighten the trigger pull. I made a mistake and ordered the incorrect version (non-DAK), and GrayGuns was great about swapping that out for me, so initial service was stellar. I decided to add the SRT kit, and the combined effect was incredible…like a custom job! Smooth as glass, clean break, no over-travel, crisp reset, and DA/SA pull weights of <6 lbs and < 3 lbs respectively…actually close to 2.7 lbs in SA. I even calibrated my trigger scale because I could hardly believe the results. Faster, tighter groups (especially transitioning DA to SA), and just more fun to shoot! I'm a DIYer and was able to do all the work myself with just weekend-warrior tinkering skills and a few YouTube videos, so there's some satisfaction there too. Not cheap, but worth every penny with such a dramatic and immediate impact. Over 1500 rounds through it so far, with zero issues…flawless! And again, GrayGuns service was five star throughout.

    Upvote if this was helpful (5) Downvote if this was not helpful (1) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  63. One person found this helpful
    Charles

    Love it!

    Charles (verified owner)

    Installed the Enhanced leverage system on my P229 Legion along with the P Series Custom Strut so I’m not sure what made the biggest difference. This dropped the DA and SA trigger pulls considerably. My DA measures just under 8# and SA averages 3# with the 19# main spring.. The trigger also is smoother. I was concerned I might have light primer strikes but have very solid hits. 100 reliability so far. I’m very pleased with both of these products.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  64. 3 out of 3 people found this helpful
    babue7359

    P229 ELS

    babue7359 (verified owner)

    Amazing results for a drop in kit. I wanted to lighten the double action pull but the cost of shipping a firearm back and forth kept me from sending the gun off. The ELS kit lighted the double action pull and smoothed it up. I do not have a gauge but the original pull felt like 12 pounds and adding the ELS kit and a 19 pound spring, I also bought from Gray Guns, dropped it to what feels like 9 pounds.
    The single action pull also was improved but that was not the reason to add the kit, just a side benefit.
    Well worth the money for the results.

    Upvote if this was helpful (3) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  65. 3 out of 3 people found this helpful
    wcaruthers

    P226 ELS System

    wcaruthers (verified owner)

    I have a mid 80s German manufactured P226 that is a beloved member of my collection. I was looking for a way to mitigate first shot DA pull without impacting the stone cold reliability this firearm has always demonstrated. I have been aware of Grayguns products and saw the new ELS trigger system. Finally came my turn on the wait list and purchased it. The install went fairly smoothly with some excellent coaching by Dennis and Keith that I am grateful for. Ran about 300 rounds with the new system and it has been everything i could have wished for. Easier first round DA pull, fast resets with no degradation in reliability that I can observe.

    It was everything I could wish for. The product quality is exceptional.

    Upvote if this was helpful (3) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Disclaimer

Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.

Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.

Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.

Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.