- Please choose product options by visiting HK P30, P2000 Short Reset System.
SIG P-Series Adjustable Straight Trigger – P226, P229, P220
$74.00 – $79.00
The SIG P-Series Dual Adjustable Straight Trigger is machined from tough steel and includes over-travel and pre-travel adjustability. Ensure you review the full description before ordering. (Scroll down for video introduction.)
Heat-treated and finished in black oxide. Occasionally available in Nickel Teflon PTFE, PVD, Titanium nitride (TiN) Gold, or TiCN (Copper).
This premium aftermarket trigger is designed to fit current and older traditional double-action (DA/SA/de-cocker) P-Series pistols, including the P220, P226, P229 and many variants. See the complete fit guide and description below.
Description
The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This premium aftermarket trigger includes over-travel and pre-travel adjustability. (Adjustable for double-action slack and single-action over-travel.)
The optimized trigger face pressure-wall angle provides outstanding single-action sear release and positive, ultra-fast reset control. The ergonomics provide superior double-action leverage and control.
Dual Adjustable Straight Trigger Details
This steel trigger is carefully heat treated and finished in black oxide, Nickel Teflon PTFE, PVD or Titanium nitride (TiN) Gold. Tight pin hole tolerances assure smooth, solid function. They are guaranteed for life against defects in materials or workmanship.
Included in the package is a hex key for adjusting pre-travel and over-travel.
The trigger weight is about .83 ounces (23.45 grams)
Finishes
Black Oxide
- Standard blued finish
Titanium Nitride (TiN)
A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:
- High hardness and adhesion
- Good chemical resistance
- Good temperature resistance in air
- Relatively low thermal conductivity
- Attractive, golden color
Titanium Carbo-Nitride (TiCN) (Copper)
The TiCN Copper finish features high hardness, low residual stress, good abrasive wear resistance, and high reliability in dry operations.
Physical Vapor Deposition (PVD)
This state-of-the-art process creates a molecular bond to the trigger, resulting in a durable finish. The PVD finish should not rust, discolor or tarnish.
Nickel PTFE
Electroless Nickel PTFE (Teflon®) is an advanced, self-lubricating, composite coating with PTFE particles co-deposited in the electroless nickel layer. Provides a hard, uniform, self-lubricating coating for our premium aftermarket triggers.
Dual Adjustable Straight Trigger Fit Guide
The trigger is designed to fit both current and older model traditional double-action (DA/SA/decocker) P-Series pistols, including
- X5 All-Round
- P220 (see exceptions below)
- P226
- P228
- P229
- P227 and others
The trigger is incompatible with our trigger bars included with the Enhanced Leverage System.
These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.
This trigger may not be fully compatible with California-compliant or similar P-Series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.
The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.
Check out the P-Series SAO Dual Adjustable Straight Trigger if you’re looking for this trigger’s single-action only (SAO) version.
Additional information
Weight | N/A |
---|---|
Package Dimensions | N/A |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
Disclaimer
Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.
Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.
Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.
Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.
0 reviews with a 3-star rating
There are no reviews with a 3-star rating yet