P320 +5 Competition Base Pads

P320 plus 5 magazine base pad
P320 +5 Competition Base Pads - Image 2
P320 +5 Competition Base Pads - Image 3
P320 plus 5 magazine base pads
(8 customer reviews)

$45.00

Designed for hard-duty and competitor use. Our custom Grayguns SIG Sauer P320 9mm Plus 5 magazine base pads are manufactured from 6061 Aluminum. The price listed is for one base pad.

Each pad features a 3-by-5 matrix. Number your mags using a Sharpie or paint pen. Additional space is available to write your initials.

Also available in a heavy (3.1 ounce) brass version. Read the Fit Guide below.

Save $3 each when you buy three or more base pads! The discount is shown in the cart before checkout.

Add Laser Marking

Custom laser marking is available for your base pads. First, add your base pads to your cart, then click here to customize your laser marking!

State and regional magazine capacity restrictions apply. Therefore, we cannot ship this item to California, Connecticut, Hawaii, Maryland, Massachusetts, New Jersey, New York, Rhode Island, Vermont, Washington, Washington, D.C. and Cook County in Illinois.

Out of stock

- Join the list to be emailed when this product becomes available
SKU: BPD-SIG-32X-COMP-5 Category: Tag:

Description

Looking for Hard Duty Use base pads for your SIG Sauer® P320 that will fit an extra five rounds of 9mm? These base pads work with 15, 17 and 21-round P320 9mm magazines. Use your stock magazine springs for the 15 and 21-round magazines, but use the included Wolff Spring for the 17-round magazines. View the Fit Guide below for details on .40 and .357 SIG capacity.

Professionally finished with MIL-A-8625 Type III anodized coating. Pads go through a glass-beading process to provide a flat-black finish.

These custom Grayguns base pads have been built for competition, military and law enforcement use. Designed to be repeatedly dropped on concrete or asphalt hundreds of times, they are a perfect upgrade for the OEM plastic pads.

Our base pads are compatible with our P320 xSeries Laser-Sculpted Grip Module and xCompact Grip Modules.

P320 Competition Base Pads Fit Guide

Backward compatible with P320 modules, including the standard and xSeries, with or without the extended magwell installed.

These base pads will not fit P320 X-TEN magazines. We do offer base pads for the P320 X-TEN.

For those with .40 and .357 SIG magazines. these extended base pads will be plus three instead of plus five. With aftermarket followers, you may be able to get plus four.

Product Notes

  • UPSPA Length – The 17-round magazines with our +5 base pads will fit the 141.25 mm size limit for Limited and Carry Optics
  • No base plate is required, as the back plate (shown) holds the base pad in place.
  • The last round is pretty tough to load on the 17-round magazines; we suggest you use a loader. The 15 and 21-round magazines are easier to load fully.
  • These aluminum base pads weigh 1.2 ounces.
  • We do not test the fit with third-party magwells or grip modules from other sources.

Installation Instructions

These base pads are designed for use without an OEM inner base plate. Remove the inner base plate and have the magazine spring sit directly within the base pad during assembly.

Additional information

Shipping Weight .125 lbs
Shipping Dimensions 10 × 6 × 2 in

8 reviews for P320 +5 Competition Base Pads

5.0
Based on 8 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-5 of 8 reviews
  1. Robert C
    Verified owner

    Wasn’t sure how well I would like this item I ordered one put it on a 21 round mag no hassles no problems runs great. I will be getting more.

  2. Jeffrey Hernandez
    Verified owner

    Fit great. Look good. Fits three different magwells. Great product.

  3. Mike Edwards
    Verified owner

    Purchased 2 of the +5 Base pads. Fit and finish were perfect. Installed them on 2 17 round Sig mags that woud not fit my P320 AXG Scorpion due to the mag well installation. These base pads not only gave me higher capacity magazines but allowed me regain the use of those previous non-fitting mags. There were absolutely no clearance issues and the modified mags worked flawlessly.

  4. slimchunky
    Verified owner

    just purchased several new GG base plates for my P320’s, i had put on extended magwell on my Sig’s and have been wanting these plates to personalize and make them more functional and they installed in minutes and feel and look great and they work flawlessly with my 320’s, could not be happier and will be buying new triggers next … thanks for following up Bruce

    Tim H

  5. Ring68
    Verified owner

    P320 +5 base pad works great!

Add a review
P320 +5 Competition Base Pads P320 +5 Competition Base Pads
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required

Related Products

Disclaimer

Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.

Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.

Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.

Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.