{"id":104,"date":"2009-07-27T11:26:01","date_gmt":"2009-07-27T16:26:01","guid":{"rendered":"http:\/\/grayguns.net\/?p=104"},"modified":"2009-07-27T11:26:01","modified_gmt":"2009-07-27T16:26:01","slug":"guide-to-sig-sauer-pistol-inspection","status":"publish","type":"post","link":"https:\/\/grayguns.com\/guide-to-sig-sauer-pistol-inspection\/","title":{"rendered":"Guide to Sig Sauer pistol inspection"},"content":{"rendered":"
I’ve had a handful of e-mails asking how to tell if a used Sig is still in good shape or not. After writing the same e-mail over and over for the last five years, I figured it was time to post my thoughts on what to look at when you’re going to purchase a used Sig Sauer pistol.<\/p>\n
The first thing to look at is the frame rails. The rails will tell you everything that you need to know about how well the gun has been taken care of. The following is how the colors of the under side of the frame rails will change as your gun wears.<\/p>\n
The next thing to look at is the disconnector tab on your trigger bar. That’s the part of the trigger bar that sits up highest in the frame. A factory new trigger bar will have a nice radius across the top, a heavily used one will have a flat worn into it. The best way to check and make sure it’s still functioning correctly is to pull the slide back by one-quarter of an inch and pull the trigger, if the hammer doesn’t try to fall you’re OK.<\/p>\n
The next place to look at is the barrel. You will notice the “smileys” on the barrel on the muzzle end. If you run your finger down the barrel and feel a dip, you may want to have the gun looked at by a professional, the slide should not be abrading the barrel enough to remove any metal at all. The presence of a dip in the metal would indicate that your slide has a burr in it.<\/p>\n
If you look at the front of the chamber section at the top of the barrel you will see a ledge that steps down just before the tube part of the barrel starts. The ledge there should be at a clear 90 degree angle, any rolling of that sharp corner would indicate a soft barrel or one which hasn’t been lubricated properly.<\/p>\n
The slide should also be inspected. The slide lock lever detent on the slide should be looked at for burrs or any rounding on the rear or the notch. A burr sticking out can abrade your thumbs if you shoot a thumbs forward grip. A burr on the slide could indicate a slightly soft slide or that the previous shooter kept their thumb on the slide lock lever. A rounded off notch at the back would indicate an improper heat treat of the slide.<\/p>\n","protected":false},"excerpt":{"rendered":"
I’ve had a handful of e-mails asking how to tell if a used Sig is still in good shape or not. After writing the same e-mail over and over for the last five years, I figured it was time to post my thoughts on what to look at when you’re going to purchase a used…<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":"","_links_to":"","_links_to_target":""},"categories":[3],"tags":[17,28],"yoast_head":"\n