Laser-Sculpted Grip Modules – P365 & P365XL
$100.00 – $170.00
If you want to upgrade your SIG Sauer® P365 or P365XL while providing a firm grip for carry, this is an affordable way to get a customized module.
Modules will occasionally be available in Cerakote™.
Photos shown may not reflect the exact color or model selected. Ensure you read the description, Fit Guide and notes below before ordering.
Need a Manual Safety or Magazine Disconnect Cut? Add your grip module(s) to your cart on this page, then add the service to your order.
Description
Our laser-sculpted P365 grip modules use an etched “Grayscale” pattern that is 50 percent deeper than standard but retains enough smoothness in areas to allow the weapon to move against clothing.
The process and coverage of the Grayguns laser-sculpted module increase the stippled grip area by 40 percent, adding more in front of and behind the original factory grip area.
These individually crafted modules are laser grayscaled in a process that interacts with the natural variations in the polymer; the result is a laser stippling that becomes unique to that particular module.
Ensure proper disassembly and assembly when removing/installing the fire control unit from the module. If you have questions, contact Grayguns or someone familiar with the P365 system.
Our custom-designed, laser-sculpted SIG Sauer P365 grip module starts as a standard SIG grip module.
Cerakote is applied by hand, and the finish may wear with holster use. If you receive a grip module with defects or blemishes, please let us know before you install it. Unfortunately, because of the custom nature of this product, once it’s used, we may not be able to take it back for a refund.
If you want to add a manual safety to your P365 or P365XL, we have a kit with a grip module and manual safety that can be self-installed.
P365 Grip Module Colors
- Black modules are the standard black factory (OEM) color
- Tan modules are the standard tan factory (OEM) color, unlike Cerakote Coyote. (We are not doing modules in factory tan color for the P365.)
- Other colors that may be available are an applied Cerakote finish atop the standard black factory (OEM) color.
P365 Grip Module Fit Guide
Fits most P365 variants.
- P365
- P365XL
- P365X
- P365 SAS*
With the magazine disconnect installed, our P365 grip modules are incompatible with California-compliant P365 fire control units.
Magazines
Magazines across the P365 line-up – including the P365 X-Macro – are generally interchangeable. Of course, a magazine designed for the grip length of a P365 will not work in a P365XL or X-Macro. An X-Macro 17-round magazine will “work” in a P365, but it will stick out quite a bit.
Important Notes
P365 SAS – Our grip modules will work with the P365 SAS fire control unit. However, they do not have the same slide lock lever relief cut. Access to the slide lock lever is difficult without modification.
Need a Manual Safety or Magazine Disconnect Cut? Add your grip module(s) to your cart on this page, then add the service to your order.
Are you interested in changing your P365, P365X or P365XL to have a manual safety? Check out our P365 Manual Safety System with Laser-Sculpted Module, which includes a laser-sculpted module and the manual safety parts.
Returns
Ensure you read our Returns, Refunds, Exchanges & Website Terms. For example, it states, “If you install any parts into or onto your gun, including grips or grip modules – they may not be eligible for return.”
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size and Color | P365XL Black, P365XL Gun Metal Gray, P365XL Coyote, P365XL Sniper Gray, P365XL Pink, P365XL DK Aloha Pink, P365XL Robin's Egg Blue, P365XL OD Green, P365 Black, P365 Sniper Gray, P365 Gun Metal Gray, P365 Coyote, P365 Pink, P365 DK Aloha Pink, P365 Robin's Egg Blue, P365 OD Green |
43 reviews for Laser-Sculpted Grip Modules – P365 & P365XL
| 5 star | 95% | |
| 4 star | 0% | |
| 3 star | 0% | |
| 2 star | 4% | |
| 1 star | 0% |
Laser-Sculpted Grip Modules - P365 & P365XL
Related Products
-
Wilson Combat P365, P365XL Grip Module
$67.00 Select options This product has multiple variants. The options may be chosen on the product page -
P365 Adjustable Hybrid Trigger
$94.00 – $99.00 Select options This product has multiple variants. The options may be chosen on the product page -
Laser-Sculpted Grip Modules – P365 X-Macro
$140.00 – $190.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!
Laser-Sculpted Grip Modules – P365 & P365XL (Blemished)
Original price was: $170.00.$136.00Current price is: $136.00. Select options This product has multiple variants. The options may be chosen on the product page
Disclaimer
Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.
Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.
Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.
Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.
UPDATE: I received my order 15 days after GrayGuns shipped it. After looking over the lower receiver, module, I am not too happy with the quality. I opted for the magazine disconnect cut because of California compliance. Where the magazine disconnect cut was made there are large holes and open pores in the injection mold. I compared this to multiple other lower receivers, including the stock one from Sig and none of them have these issues.
I attempted to contact Gray guns customer service And was told by Kim that the holes and damage are called a “void” and that it is common (I’ve never seen this on a sig cut module). Kim told me there are no exchanges or refunds without paying a 25% fee.
For $195 USD, this module is simply not up to quality standards. Holes in the module or “voids” are unacceptable at this price point.
Photos are posted on google reviews
Eddie, We are sorry that our service and product did not meet your expectations. The grip modules are SIG factory originals (without the California disconnect cut) that are customized by our team and vendors. The Cerakote color and the laser stippling is our customization. When ordering the P365 module with the Magazine Disconnect Cut, we add the interior cut. Almost all of the modules we have seen do have small pockets or voids when we cut into them. About two out of three P365 modules show the voids you noted where we make the cut. They are not made by the cut, rather they are exposed by the cut. The small voids do not effect the functionality or strength of the module. The second photo on the magazine disconnect page does show these voids, but it is a bit difficult to see them.
Shipping Time: As noted on the disconnect cut order page, this is an add-on in-house service that takes an additional three to five business days to ship. Our system did create a tracking number for you at the time of order, and we are looking to see if we can adjust that feature. (Our system did send you an automated email specifically referencing the additional time needed to process your order.) We missed that estimate and shipped on day six. USPS Ground Advantage during the past 30 days – including your order – averaged four to five business days for shipping time to California. It arrived on the fourth business day, but they did not have access to your delivery location. It arrived the next day.
As noted on the P365 Magazine Disconnect Cut page, custom-cut products are not eligible for return unless a defect in materials or workmanship is identified. It looks like we did offer you a return option with a restocking fee.
Again, we apologize that we did not meet your expectations. We are reviewing the description of the service and will be adding some language referencing your comments about the viewable voids that may be exposed by the cut.
Grabbed an ODG green module for my P365, fit and finish is awesome. GrayGuns did the machining to make it compatible with California models and everything works great. Highly recommend if you’ve got a CA P365!
well made. fits my sig p365 perfectly and looks great! It’s like having a gun.
Super happy with my new P365XL grip! I can fit 3 fingers around the grip now, instead of 2.5 before on my regular P365 module. Quality is second to none! I got the Sniper Gray and it looks so great with my stock black slide.
I had a question if i needed the magazine disconnect service. Customer Service was prompt and knowledgeable! I can’t wait for my next Gray Guns purchase!
Ordered a sniper gray module for a P365 build and it is great! Love the grip texture and the gray goes great with the stainless slide. Would definitely recommend!
LOVE IT
I absentmindedly ordered the 365 grip module instead of the 365XL grip module. I called grayguns told them my problem. I was told to send it back and they would replace it with the proper grip module. I sent the 365 back on a Friday and had the correct one back 7 days later the following Friday. The grip module was ordered with the manual safety cut so I thought it would take at least 2 weeks. I am extremely happy with their service. So much so I’m thinking about sending in my Sig P220 SAO in for a complete service. Looking forward to working with this company again. Thank you for the quick and accurate
Great Product, shipping on time, perfect fit. It is easy install without any modification need. I love OD green color. It looks good and feel good when you hold it.
Suffice to say, the process of removing the fire control unit from the previous module and into this one was straightforward and easy. This makes my pistol unique enough for others in my circle to stand out. The texture of the module is very satisfactory: sticks to the skin of my hand but not abrasive enough to be uncomfortable. Look forward to purchasing an X Macro grip module of the same color.
This is exactly what I wanted for my CA compliant 365. Thanks to customer service for letting me know to order both additional cuts for it.
High quality craftmanship and fast accurate shipping. More aggressive than factory for a better grip but less aggressive than Wilson Combat to reduce chafing. Note: be careful, sig uses a lot of different terminology for their different sizes so you make sure to get the right one (x, xl, macro, etc)
Perfect fit and feel, the exact look I wanted.