P320 Extended Magazine Release
$49.00 – $54.00
The Grayguns P320 Extended Magazine Release is a drop-in aftermarket upgrade for SIG Sauer® P320 Standard, X-Series, and TXG modules*.
Along with the extension to make the release more accessible, it features a checkered face and improved ergonomics.
Available in our standard Diamond-Like Carbon (DLC) black finish. Occasionally, you’ll see additional finishes available in Titanium nitride (TiN) Gold, Physical Vapor Deposition (PVD) Blue, or PVD Coyote.
Installation requires the OEM Magazine Catch Stop and Magazine Catch Spring.
Description
The P320 Extended Magazine Release – which is reversible – is manufactured in the United States from tool steel. The release is correctly heat-treated for maximum durability and wear resistance.
- Properly heat-treated tool steel
- It is longer than the OEM version
- Improved ergonomics
- Checkered face
- Reversible design for right and left-handed shooters
P320 Extended Magazine Release Fit Guide
The extended magazine release fits the following grip modules
- SIG Sauer’s P320 Standard, X-Series, and TXG modules
- Grayguns’ Laser Sculpted X-Series, Laser Checkered X-Series, and TXG modules
- Wilson Combat Grip Modules sold by Grayguns
We have not tested our extended magazine releases in third-party grip modules other than those sold by Grayguns. We can not tell if or how they will fit in other grip modules, especially the aluminum modules on the market. In short, due to variations in design, they may not fit third-party grip modules.
Important Notes*
- This magazine release will not fit the AXG modules as the AXG grip has a different design
- It will not work with grip modules for .45 caliber P320s
Installation requires OEM Magazine Catch Stop and Magazine Catch Spring.
Discoloration in the mid-section of the part is expected. However, it can not be seen when installed and does not affect performance. The discoloration results from fixture “pinch points” holding the part during the coating process.
Additional information
| Weight | N/A |
|---|---|
| Package Dimensions | N/A |
| Finish | DLC Black, TiN Gold, PVD Blue, PVD Coyote |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
2 reviews with a 4-star rating
Disclaimer
Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.
Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.
Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.
Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.
Thaddeus Bartz (verified owner) –
Fixed my issue where OEM release was too short to hit without shifting my grip. Was a bit sharp on my thumb, but with a small bit of filing, I took the hard edge off. If I had any suggestions, I’d say taking the edges off the sides of this release would be an excellent improvement. As for me, it works just fine, and is an excellent upgrade for my P320.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mark Gothel (verified owner) –
The extended mag release is good. Met most of my expectations. One of the main reasons as to why I decided to buy the product was the texturing. It looked more aggressive than what comes stock from SIG. The serrations on the mag release are not as aggressive as what I thought. I personally prefer it to be a little more grippier. Aside from that, all other expectations were met. I wish more pictures were available online so you can get a real good visual on the product that you’re buying. For those who are more attention to detail like me, here’s more of the description of the product. The face of the mag release is not a flat top. It curves around towards the front of the mag release. Gives you more of a textured surface area than what you would get on your stock mag release. Starting from the rear of the mag release, going forward… There is a curve that slightly goes outwards, before it goes back inwards. I would attach a picture for reference, but my file size is too large and don’t know how to get around that.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal