SIG P-Series Dual Adjustable Straight Trigger

(8 customer reviews)

$69.00$74.00

Machined from tough steel, the SIG P-Series Dual Adjustable Straight Trigger includes over travel and pre-travel adjustability. Ensure you review the full description prior to ordering. (Scroll down for video introduction.)

Heat treated and finished in black oxide, Nickel Teflon PTFE, PVD or Titanium nitride (TiN) Gold. Ensure you review the full description prior to ordering.

This premium aftermarket trigger is designed to fit both current and older model traditional double action (DA/SA/de-cocker) P-Series pistols. See the complete fit guide and description below.

Clear
SKU: N/A Category: Tags: , , , , ,

Description

The SIG P-Series Dual Adjustable Straight Trigger is the straight-faced version of our legendary curved P-Series Dual Adjustable Trigger. This premium aftermarket trigger includes over travel and pre-travel adjustability. (Adjustable for double action slack and single action over travel.)

The optimized trigger face pressure-wall angle provides for outstanding single action sear release and positive, ultra-fast reset control. The ergonomics provides superior double action leverage and control.

Dual Adjustable Straight Trigger Details

This steel trigger is carefully heat treated and finished in black oxide, Nickel Teflon PTFE, PVD or Titanium nitride (TiN) Gold. Tight pin hole tolerances assure smooth, solid function. Guaranteed for life against defects in materials or workmanship.

Made with love, supplied with a hex key.

The trigger weight is about .83 ounces (23.45 grams)

Finishes

Black Oxide

  • Standard blued finish

Titanium Nitride (TiN)

A well-proven standard layer type through its balanced properties. The golden titanium nitride layer, abbreviated TiN, indicates the following properties:

  • High hardness and adhesion
  • Good chemical resistance
  • Good temperature resistance in air
  • Relatively low thermal conductivity
  • Attractive, golden color

Physical Vapor Deposition (PVD)

This state-of-the-art process creates a molecular bond to the trigger, resulting in a very durable finish. The PVD finish should not corrode, discolor or tarnish.

Nickel PTFE

Electroless Nickel PTFE (Teflon®) is an advanced, self-lubricating, composite coating that has PTFE particles co-deposited in the electroless nickel layer. Provides for a hard, uniform, self-lubricating coating for our premium aftermarket triggers.

Fit Guide

The trigger is designed to fit both current and older model traditional double action (DA/SA/decocker) P-Series pistols, including

  • X5 All-Round
  • P220 (see exceptions below)
  • P226
  • P228
  • P229
  • P227 and others

These triggers are approximately 10mm wide. At this time, we are not suggesting this trigger for guns equipped with the DAK trigger system.

This trigger may not be fully compatible with California compliant or similar P-series pistol models equipped with a magazine disconnector, and Grayguns urges caution. We do not recommend deactivating any mechanical safety device.

The Grayguns DA/SA triggers will not fit SIG Pro, P225 / P6, P239, West German P220s, or most SAO models. Most of these triggers are a narrower 8mm width.

If you’re looking for the single action only (SAO) version of this trigger, check out the P-Series SAO Dual Adjustable Straight Trigger.

Disclaimer

These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guaranty perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.

Additional information

Weight N/A
Dimensions N/A
Variation

Black Oxide, Dual Adjustable Straight Trigger (SAO with Pin), Dual Adjustable Straight Trigger (SAO without Pin), Nickel Teflon, TiN Gold, PVD Blue, PVD Coyote

Share your thoughts!

4.88 out of 5 stars

8 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

7 reviews with a 5-star rating

  1. One person found this helpful
    mattdevi

    A wonderful piece of engineering!

    mattdevi (verified owner)

    If you can remove and install the trigger bar, you can install this trigger.

    For me, there was a dearth of online information about how to adjust the DA pre-travel but the SA over travel was covered such that I set that when I installed the trigger.

    I then went back and adjusted the DA pre-travel to only have about 1/8″ of movement with 100% DA reset function.

    For my big hands, I have more room for my trigger finger in the trigger guard after installing the P22xST.

    I installed the trigger in a P220R with a SIG SRT and will order another one for my P226R along with a GG SRT when they become available.

    I have a GG P-series spring set on order and methinks that will allow the P220R to create a state of gun range Zen for its humble owner.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. One person found this helpful
    juanmotorcop

    Fantastic

    juanmotorcop (verified owner)

    this trigger is great., fit and function is better than factory part, and feels much crisper.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. One person found this helpful
    quepasakimosabe

    Sig P229 short reach trigger replacement

    quepasakimosabe (verified owner)

    This trigger is simple to install and easy to adjust. Range time will tell how the adjustments stay set but they seem solid, especially pretravel. My used LE P229 with short reset feels like it’s a brand new gun. It makes me want to buy more products in the future.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. One person found this helpful
    mdstahoe

    Great Upgrade For P227

    mdstahoe (verified owner)

    I installed this trigger, along with Sig’s SRT Kit, and they made my P227 a whole new gun. Installation was easy and the trigger dropped right in with no fitting. Great part if you’re looking for an easy and inexpensive upgrade. Would definitely recommend and buy again.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. naksukaogearreviews

    Life changer

    naksukaogearreviews (verified owner)

    This is the 2nd trigger I have purchased from GG, the 1st being the P320 competition trigger kit (which is incredible). I love straight triggers but if thats not your thing there is also a curved version for you traditionalists. The P226 is an incredible pistol but the stock trigger leave much to be desired. The GG adjustable trigger changes all that. Easy to install, gets rid of all that nasty pre-travel, and with the straight trigger percieved pull weight is much better. Pair this with and SRT and a lighter mainspring and you have a trigger system to be envied! Great product and fast shipping as always.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. trapperjohn1975

    Awesome trigger

    trapperjohn1975 (verified owner)

    Installed one of these triggers along with the SRT kit two years ago and to me make my P220 as good as the Sigs Legion model. I wish I could find one for my Springfield XDE it’s a nice little gun but the trigger sucks. The pre travel and reset aren’t all that good

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. gbjtmotors

    Phenomenal.

    gbjtmotors (verified owner)

    I own several P series, and love GrayGuns for their SRT kits. Decided to add this to my P220 Combat and I couldn’t be happier. Install is straightforward if you are familiar with the platform, and easy enough for a beginner if you pay attention. Once adjusted properly, it handles like a dream. Definitely ordering another for my 229 Legion.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up