Laser-Sculpted Grip Modules

(7 customer reviews)

$85.00$165.00

If you are looking to upgrade your SIG Sauer® P365, P365XL or P320, while providing a firm grip for carry or competition, this is an affordable way to get a customized module. (Looking for our custom Laser-Sculpted Grip Module – P365 Manual Safety System? Click here.)

The custom designed, laser-sculpted SIG Sauer P320 xSeries modules and P365 modules start off as a standard SIG grip modules.

Carefully select the module you’re interested in. Select from P320 xSeries modules including xCarry (17-round magazines), xCompact (15-round magazines) and Full Size (17-round magazines).

Our Modules will occasionally be available in Cerakote™ Gray or Coyote.

Scroll down and ensure you read the Important Notes section below in the description!

Clear
SKU: N/A Categories: , , Tags: ,

Description

Our laser-sculpted grip modules use an etched “Grayscale” pattern which is 50 percent deeper than standard but still retains enough smoothness in areas to allow the weapon to move against clothing.

The process and coverage of the Grayguns laser-sculpted module increase the stippled grip area by 40 percent, adding more in front of and behind the original factory grip area.

Limited Editions of the module in Cerakote Gray and Coyote check the drop down menu for availability.

If you are looking for a firm grip for carry or competition, and you want to upgrade your, or just want another xSeries module, this is an affordable way to get a customized module.

Custom means unique.

These individually crafted modules are laser grayscaled in a process that interacts with the natural variations in the polymer, the end result is a laser stippling that becomes unique to that particular module.

When removing the FCU from your module and doing the UpGray’d, be sure you don’t disassemble and reassemble incorrectly. Follow the instruction video, if you inadvertently disassemble, make sure the FCU is properly assembled before reinstalling.

Please keep in mind that these are hand cerakoted can wear with holster use. If you receive a grip module with any defects or blemishes please let us know before you install it. Because of the custom nature of this product, once its used we may not be able to take it back for a refund.

Important Notes

xCompact – The P320 xCarry module fits 9mm, .40 and .357 SIG P320 uppers. The xSeries Grip Modules will not work with magazines that have “SIG SAUER” on the baseplate. They are compatible with the baseplates that have the SIG mark on it.

xCompact – The xCompact Module is designed to use the Compact or Carry Slide. The use of a full size slide will show a small portion of the slide’s guide rod tunnel cutout.

P365XL – SIG has made a special run for us which includes the magazine release!

Some modules are in Laser or Cerakote Production (2 weeks), so take advantage of the sale price and order now!

Additional information

Pistol

P365XL (Black), P365 (Black), P365 (Cerakote Gray), P365 (Silver Birch), P320 xSeries Carry (Black), P320 xSeries Carry (Silver Birch), P320 xSeries Carry (Cerakote Coyote), P320 xSeries Carry (Cerakote Gray), P320 xSeries Compact (Black), P320 xSeries Compact (Cerakote Gray), P320 xSeries Full Size (Coyote M17 Tan)

Share your thoughts!

4.86 out of 5 stars

7 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

6 reviews with a 5-star rating

  1. One person found this helpful
    posims32

    posims32 (verified owner)

    These are excellent grips. I have one on my competition P320X5 and it provides an exceptional grip even in hot summer weather. It’s give a solid grip without being overly aggressive. I really like the way it looks. I also have one on my P365. The texture is aggressive enough to provide a firm grip for recoil management with a sub-compact, while being smooth enough to not be harsh on the skin. Grayguns seems to have found the perfect balance of grip texture. I highly recommend these grips.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. 4 out of 4 people found this helpful
    recppd

    Glad I found these modules!

    recppd (verified owner)

    I ordered a GG laser etched module for my P365 and it arrived super fast! The pics online do not do these justice at all. The texture is what I would call mild aggressive, but it does stay put and it shouldn’t destroy your clothing or bare skin. It was a little pricey, but it came with the mag release already installed which is about a $15 add on. The swap over was super easy and quite honestly, this new module fits better than the original factory one. I’m very impressed so far and will be recommending them to friends…

    (4) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. 3 out of 3 people found this helpful
    werv4fun

    Glad I purchased this grip module!

    werv4fun (verified owner)

    Purchased the P365 Laser-Scuplted Grip Module, and it was received quickly. This grip module is going to be used on a P365 with manual safety. It was easy to trim out the necessary cut-out for the safety.using my “stock” module as a guide. Total process took about 15 minutes. The Laser-Sculpted grip module feels much better, especially with the sculpting in the thumb area.

    (3) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. One person found this helpful
    d.ram2k

    Tough 💪🏾

    d.ram2k (verified owner)

    This grip makes the 365 look just plain tough! I absolutely love it and the texture feels great in my hands! I highly recommend this grip.

    (1) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. wolf.eyez

    Beautiful and functional

    wolf.eyez (verified owner)

    I absolutely love this grip module. Picked up a P320C in grey, and it is stunning. The contrasted areas in black from the laser work are subtle but still stand out and look great, and enhances the overall two-tone look with a 320c nitron slide by a factor of 10! Overall grip feels as secure as many other stipple jobs but without the sharp feel or risk to tearing up clothing. I have carried this every day for a week now and it’s comfortable for all day wear IWB @ the 3:00-4:00 position. Snug fit for the FCG – and that’s hardly a bad thing.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Tyler Himel

    Beautiful and Functional

    Tyler Himel (verified owner)

    I bought the X-Carry module primarily to add a customized look to my gun. I expected the extra texture added to the edges to help out some, but I am very impressed. The texture is rougher than the original X-module. I immediately noticed that my hands stick to it much better. Im able to get more traction on my support hand, and I feel like this module really responds a strong grip exponentially better than the original. This is also my EDC gun. While I have always worn a layer behind my pistol I do feel this grip will warrant a barrier to the skin due to how abrasive it is. It isnt pointy and doesnt necessitate gloves, but I can see this causing some irritation rubbing against sensitive skin. If Id known how nice this grip is I wouldn’t have debated so long on whether or not I should get it.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up