Laser-Sculpted Grip Modules – P365 & P365XL (Blemished)

Description

Limited availability. Cosmetic damage during shipping. Issues are limited to the front and back of the back strap. Cosmetic damage is cosmetic only, and you can not really feel any difference. Cosmetic damage varies depending on the module. Photos show examples, and not all modules look the same. All sales are final. No returns or exchanges.

Our laser-sculpted P365 grip modules use an etched “Grayscale” pattern that is 50 percent deeper than standard but retains enough smoothness in areas to allow the weapon to move against clothing.

The process and coverage of the Grayguns laser-sculpted module increase the stippled grip area by 40 percent, adding more in front of and behind the original factory grip area.

These individually crafted modules are laser grayscaled in a process that interacts with the natural variations in the polymer; the result is a laser stippling that becomes unique to that particular module.

Ensure proper disassembly and assembly when removing/installing the fire control unit from the module. If you have questions, contact Grayguns or someone familiar with the P365 system.

Our custom-designed, laser-sculpted SIG Sauer P365 grip module starts as a standard SIG grip module.

Cerakote is applied by hand, and the finish may wear with holster use. If you receive a grip module with defects or blemishes, please let us know before you install it. Unfortunately, because of the custom nature of this product, once it’s used, we may not be able to take it back for a refund.

If you want to add a manual safety to your P365 or P365XL, we have a kit with a grip module and manual safety that can be self-installed.

P365 Grip Module Colors

Available colors for blemished modules will vary.

P365 Grip Module Fit Guide

Fits most P365 variants.

• P365
• P365XL
• P365X
• P365 SAS*

With the magazine disconnect installed, our P365 grip modules are incompatible with California-compliant P365 fire control units.

Magazines

Magazines across the P365 line-up – including the P365 X-Macro – are generally interchangeable. Of course, a magazine designed for the grip length of a P365 will not work in a P365XL or X-Macro. An X-Macro 17-round magazine will “work” in a P365, but it will stick out quite a bit.

Important Notes

P365 SAS – Our grip modules will work with the P365 SAS fire control unit. However, they do not have the same slide lock lever relief cut. Access to the slide lock lever is difficult without modification.