HK P30 Straight Trigger

(21 customer reviews)

$95.00

The HK® P30 Straight Trigger is designed for rugged use and competition to deliver performance and quality that will outlast your pistol.

  • Reduces gross over-travel allowing for a shorter reset
  • Straight face for improved finger placement
  • Vertical, 90-degree wall for an optimal trigger break

Fully compatible with the Grayguns HK P30 Short Reset System and HK P30 (with Safety) Short Reset System.

Available in standard black oxide or Nickel PTFE finish.

Ensure you review the Fit Guide below before ordering this trigger.

SKU: N/A Category: Tags: , , ,

Description

Designed by Keith Hosey, Grayguns’ director of gunsmithing, the HK P30 Straight Trigger is a first-of-its-kind in the market. Fits all P30 variants. The trigger reduces over-travel while featuring a 90-degree optimal trigger break.

This P30 aftermarket straight trigger design does allow for lower finger placement and may provide the feel of reduced pull weight. The trigger design does not reduce pull weight.

Made in the United States to high-quality standards, guaranteeing the fit and finish Grayguns is known for. Precision machined from tool steel and heat-treated adequately for optimal wear resistance. Hand inspected and finished to assure a quality trigger we can stand behind for life.

HK P30 Straight Trigger Fit Guide

This trigger fits all variations (LEM, DA/SA, and SAO) of the HK P30 line – and only the HK P30 line – of pistols. Including:

  • P30
  • P30L
  • P30SK

Fully compatible with the Grayguns HK P30 Short Reset System and HK P30 (with Safety) Short Reset System.

Finishes

Black Oxide

Our high-quality blued finish is our standard for this product.

Nickel PTFE

Electroless Nickel PTFE (Teflon®) is an advanced, self-lubricating, composite coating with PTFE particles co-deposited in the electroless nickel layer. Provides a hard, uniform, self-lubricating coating for our premium aftermarket triggers.

Additional information

Weight .125 lbs
Package Dimensions 6 × 4 × 1 in
Finish

Black Oxide, Nickel

Share your thoughts!

5 out of 5 stars

21 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

What others are saying

  1. One person found this helpful
    kfordtx62

    A serious upgrade…

    kfordtx62 (verified owner)

    I’ve found the combination of a GrayGuns flat trigger and short reset kit to be magic in my LEM P30 series pistols.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. don.morrow

    HK P30 Straight Trigger

    don.morrow (verified owner)

    Fit and finish is flawless. Dry fire feels great. going to the range this weekend to actually put some rounds down range, can’t wait.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. ironrunner312

    P30 Straight Trigger

    ironrunner312 (verified owner)

    Amazing! I am shocked at the difference this made from both the left and right hand . Easy trigger feel and better accuracy. Definitely exceeded my expectations!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Kevin McCue

    P30L Straight Trigger in Nickel PTFE

    Kevin McCue (verified owner)

    Excellent fit and finish.
    Well done purchase experience on website.
    I purchased the special needle nose pliers that literally made the installation a 5 minute job.
    No exaggeration. Literally 5 mins.
    Great feel to the trigger together with the short reset kit. Trigger breaks exactly vertical at 90 deg.
    Couldn’t be happier.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. One person found this helpful
    William Cook

    Outstanding!

    William Cook (verified owner)

    I had the Nickel PFTE trigger installed on my P30SK. I like flat triggers. I like full metal triggers. I did not think to put the stock trigger on a gauge before replacing it with this Gray Guns trigger, but I would swear that it lightened the trigger pull by a pound or so.
    I do know that it smoothed out the action…a massive improvement for me and my fingers!
    Excellent job!

    Upvote if this was helpful (0) Downvote if this was not helpful (1) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. dawaller70

    P30 Trigger

    dawaller70 (verified owner)

    The trigger is a great addition to the P30L that I have. I changed out the trigger and the short reset and what a difference it made. I wish I would have changed them out a long time ago.

    The trigger install went good, but getting the spring back in was difficult. I ended up taking an old pair of pliers, used a diamond Dremel bit and rounded off the grip like the pliers that can be purchased. Once I did that, the spring went right into place.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. jagrease

    Great !!! But I wished it was CURVED

    jagrease (verified owner)

    I Love H&k. Among my collection, I have a Mark 23. It has a Metal-Curved-Serrated trigger. I have always loved the feel of that trigger. “This flat trigger has a very familiar feel that makes me think of the Mark 23 only straight. Which is fine and I like it. However, I would like to see grayguns make a curved trigger variation for those that still like the traditional style.
    Keep up the good work grayguns!!!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. KERRY HENDRICKS

    These items are a must have

    KERRY HENDRICKS (verified owner)

    Perfect fit, combined with the short reset system it made a significant difference. I cannot believe the P-30 come with such a sloppy trigger mechanism. These items are a must have.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. One person found this helpful
    petro31

    Great Product

    petro31 (verified owner)

    The installation of the flat face trigger to my P30L made a world of difference…..for the better. I would prefer if the right and left edges of the trigger were just a bit softer (rounded). Just my personal preference. I’m still giving this product 5 stars. I would buy this product again without hesitation.

    Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. da.alred

    Great Upgrade

    da.alred (verified owner)

    I installed the short trigger reset system in my DA/SA P30L and was very pleased with the results. The stock trigger worked fine with the upgrade so I debated a short time as to whether or not to add the flat trigger. After installing the flat trigger I realized there should have been no debate at all. Now I can’t imagine shooting my P30L without the Gray Guns trigger system. It works exactly as advertised and I could not be happier with the improved performance of the pistol.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Kurt Benedict

    HK P30 Flat Trigger

    Kurt Benedict (verified owner)

    Great addition to the P30, much better feel and quality than the factory plastic trigger. Great product.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Dave Nazareth

    P30L straight trigger

    Dave Nazareth (verified owner)

    What a superb product. The straight trigger should come standard from HK. I highly recommend it.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. Kiyokazu Nakagawa

    Definitely Staying In My P30LS

    Kiyokazu Nakagawa (verified owner)

    I was hesitant for quite a while specifically because I have small hands and flat triggers on a DA/SA no less seemed like it would be too far of a reach. However, something about the geometry made me feel that it would still be very much doable. It was.

    The biggest takeaway is the trigger dropping the hammer at a much forward position and not all the way back up against the frame. This, in addition to the 90 degree wall position makes for a very predictable trigger. I did not perceive any reduced weight as some others have stated. I could see how some would. The trigger when installed is solid. No side to side play and zero wiggle, it feels much more substantial. This would be excellent in a 4.1 LEM as well. I carry cocked and locked and its perfect. I practice in DA regularly and it too is confidence inspiring.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. KASEY O'CONNOR

    Great fast efficent service

    KASEY O’CONNOR (verified owner)

    Have not fired my P30 SK 9mm v3 yet but dry fires well and feels great. The biggest hastle on indstall was the return spring and finding a tool that would work. Had an old pair of mini needle nose vice grips:; had to grind them down to more needle point and grind a slight groove in the mouth of the jaws to hold the spring, then was smooth as butter.
    I did find where u-tube has gone completely PC and pretty much removed videos on any work on pistol stuff. Snowflakes are among us.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. pledbetter2000

    Outstanding

    pledbetter2000 (verified owner)

    I am never one to “enhance” carry weapons, but this time I decided to take the plunge. HK weapons from the factory are amazing. The only thing I was never a fan of was the polymer trigger. It flexed, and trigger break always felt vague and underwhelming. After installing this trigger (and the short reset) my P30SKS is “next level” and HK should make this system the standard going forward. Excellent quality and timely shipping.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. tgs0685

    FABULOUS

    tgs0685 (verified owner)

    Absolutely fantastic upgrades from Gray Guns, on my HK P30SK V3. Installed the Gray Guns Flat Trigger, & the Awesome Gray Guns Short Trigger Reset Kit. Together this is absolutely a must have on this EDC Weapon. Definitely highly recommend, I had my professional experienced gunsmith complete this installation of both GG HK P30SK V3 parts. Zero issues, flawless performance! I am a HUGE HK Fan. I own (7) HK weapons, including a P2000, which also has the GG Short Trigger Reset Kit! Totally worth every penny! Fabulous Customer Service.
    Thank Y’all for what you do!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. John Hill

    Wow

    John Hill (verified owner)

    This trigger, in conjunction with the SRS and FPBS, really MAKE the gun. If your intent is to actually shoot this gun, these parts are an absolute must. I can’t think of any other way to say it.

    I advise getting that special trigger return spring tool as well as perusing Youtube for installation advice. GG was great with after purchase support in this area.

    After installing the above parts I did have a slight problem with the trigger resetting. Lots of oil and about 500 rds of dryfring cleaned it up nicely.

    Highly recommended.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. Mark Werthman

    P30 Straight Trigger

    Mark Werthman (verified owner)

    Well made product and designed ergonomically correct. Good price great service.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. ah6317

    I was skeptical but quick to change my mind

    ah6317 (verified owner)

    I was a little worried that I wouldn’t like it but can say now it was completely worth the price. The pictures of the trigger in DA mode kind of turned me off. The straight trigger leaning so far forward just looked out of place and seemed like it might pose an issue when taking the first shot in DA mode. Needless to say I ordered it along with the short reset system and at first only installed the SRS kit one it’s own. That on it’s own was spectacular but I waited about a week to do the trigger. The main reason being the angle of the trigger in DA mode that I first mentioned. The other being the swap requires some patience getting the trigger return spring back into position. After watching a couple videos and reviewing the complete field strip guide on HKPro I modified a set of needle nose pliers to hold the return spring while doing the job and decided to give it a go and I couldn’t be happier. The reset actually seems better with the GrayGuns trigger. It sits at a perfect 90 degree angle when resting on the reset wall.

    Oh my Lord do I love this gun now. With the SRS and trigger this is a different gun but at the same time maintains all the reliability everyone loves with the HK. The trigger breaks like glass when you pull it. Not quite as spectacular as a well tuned 1911 but far better than most standard issue ones.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. brent.hoylman

    Love this upgrade!

    brent.hoylman (verified owner)

    I never liked the tapered trigger on my P30L. I ordered this with a short reset trigger kit and the combination greatly improved the reset and feel of the trigger. The only issue I had was the re installation of the trigger return spring,

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Stephen Belansky

    Like this trigger.

    Stephen Belansky (verified owner)

    Trigger was installed into a P30SK. Installation was complicated only by re-installation of the trigger return spring. The short leg of the spring was difficult to keep in position while pushing the spring into place since I don’t have the HK spring pliers and didn’t want to grind one of my own. A length of thin tubing that often comes with spray cans, such as brake cleaner or lubricants, was slipped over the short leg which allowed the leg to remain in position while pushing the spring into place greatly simplifying the job. This trigger is exactly what I wanted for SA mode. The only minor issue is in DA mode. The tip of the trigger is somewhat thin and due to the forward position in DA, the tip tends to initially pinch the trigger finger slightly. In SA the trigger is vertical and there are no issues. Over travel seems to have been reduced but this was not measured. Due to the different leverage point for the trigger finger the pull weight also has been reduced. This trigger was installed at the same time as the Grayguns reduced reset kit and the measured pulls can be seen in my review of that kit.

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Disclaimer

Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.

Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.

Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.

Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.