HK P30, P2000 Short Reset System
$85.00
Replicate our custom in-house short reset conversion with a drop-in kit for your HK P2000 or P30 without a thumb safety. Cut from bar stock steel, these kits provide an exacting fit for easy install.
The kit shortens the reset travel distance by about one-third, reduces trigger over-travel and reduces pull weight while maintaining all factory safety functions.
This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA, LEM or CDA LEM 4.1 trigger variations. Review our Fit Guide below.
The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system and all must be installed to function.
Two variations available. One for DA/SA and LEM triggers, and one for those who have installed the HK 4.1 trigger system. Ensure you select the correct option.
Description
This product from Grayguns replicates the the short reset conversion for HK pistols found in our custom action work for many years in a convenient, easy to install kit. These parts are precisely wire cut EDM from ground bar stock to exacting tolerances for easy install and a precise fit. They are properly heat treated and coated in a durable nickel PTFE finish for a lifetime of durability and smooth function.
The kit is engineered to provide several benefits:
- Shortens trigger reset travel distance by approximately 33 percent
- Converts the action to drive the sear directly off the control latch – instead of transferring energy through the catch – for a direct drive connection between the control latch and sear
- Reduced trigger over travel values
- Maintains all factory safety functions
- Works with both DA/SA and LEM variants, or the HK 4.1 trigger system. (Ensure you select the correct option.)
- Included Grayguns Firing Pin Block Spring reduces stacking in DA pull and lightens trigger pull
Includes
The parts provided – control latch, extended sear roll pin and firing pin block spring – are designed to be installed together as a complete system.
- Custom-designed Grayguns Control Latch
- Custom replacement Firing Pin Block Spring
- Custom replacement Extended Sear Roll Pin
Fit Guide
The kit works with all variants of the HK P2000 and P30 models without a thumb safety including:
- P30
- P30L
- P30SK
- P2000
- P2000SK
Disclaimer
These parts are intended for installation by a qualified armourer or gunsmith. In some cases professional fitting will be required by a trained, qualified armorer/gunsmith who is very familiar with the pistol’s action. This is due to the varying tolerances present in all mass-produced firearms. Although kits fit with no issues in a great majority of pistols, Grayguns is unable to guarantee perfect functionality in every instance. Grayguns does offer installation services for all parts kits we offer.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Trigger Variation | DA/SA and LEM Trigger, CDA LEM 4.1 Trigger |
Share your thoughts!
Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
brent.hoylman (verified owner) –
Installed this kit in about 30 minutes with the help of a YouTube video. It does exactly what it is supposed to and shortens the trigger reset a bunch. I coupled this with the Gray Guns Flat Trigger and now have a reset that is close to what a Sig P22X has with a SRT.
(0) (0) Watch Unwatch
Stephen Belansky (verified owner) –
Installed the kit into a (2021) P30SK. Installation into the lower was straightforward and relatively easy. Installation of the firing pin block spring was a bit more complicated as my version has both the firing pin block and firing pin safety requiring removing/installing the tiny pin that retains the pin safety. A Grayguns flat trigger (see review on that part’s page) was installed at the same time. Unfortunately, I could not get an apples to apples comparison of reduced trigger pull since the factory trigger would center the gauge in the middle as opposed to the trigger tip on the flat trigger, hence the leverage is different. That stated, before pull weights were DA 9lb 6oz, SA 5lb 4oz. After the kit and trigger install, the pull weights reduced to DA 6lb 8oz, SA 4lb 3oz. The kit feels as though it has reduced the reset by 40~50% (did not measure due to also changing the trigger) and has significantly reduced the trigger take up after the reset point.
(0) (0) Watch Unwatch
childofperdition (verified owner) –
20 mins and a good youtube video and it was done. Cut the reset by half in my opinion
(0) (0) Watch Unwatch
Jose Ginete (verified owner) –
Definitely worth it. The HKP30 is one of the best pistols out in the market. Except the trigger, the trigger needs some tuning and this ShortReset makes the P30 perfect for me. I don’t understand why the P30 isn’t made with this ShortReset trigger already. If you’re reading this, you’re contemplating on buying… just do it!
(0) (0) Watch Unwatch
Leon Stern (verified owner) –
I received the kit about a week ago. All the parts were very high quality. The only difficulty I had was that I dropped the firing pin block spring. Be very careful with that spring. Don’t work on carpet. The install was simple and quick. I tested the gun and everything works perfectly. The improvement in the trigger is amazing. This is a great kit.
(0) (0) Watch Unwatch
rpesig (verified owner) –
This kit is an excellent upgrade I applied to my P30. Trigger reset is about 1/3 what it was and the trigger pull is smooth. I managed to lose that pesky extra fine firing pin block spring during installation, but CS came through and sent me a replacement. Thank you, Gray Guns.
BE CAREFUL WITH THE SPRING when installing!
I really appreciate the quality of Gray Guns’ products and will definitely do business with them again. Highly recommended.
(0) (0) Watch Unwatch
rasandler (verified owner) –
I bought this kit for my P2000SK. the youtube videos make the installation look pretty straightforward but i decided not to risk it and had my gunsmith do it. the difference was immediately noticeable. i would say that the new reset length is probably about 1/3 of what it was. when i fire slowly enough to stop as soon as the trigger resets, it’s a joy. i can tell that i still need to build new muscle memory because as i speed up, my finger tends to continue to the old reset position. i’m sure that’s just a matter of time and training.
i consider this kit to be a very worthwhile investment.
(0) (0) Watch Unwatch
rhythm195 (verified owner) –
I installed this kit into my P30 with a light LEM (V1) trigger and a 12lb hammer spring. It elevated my P30 from one of the worst triggers on the market to one of the best. I love it so much now that I no longer enjoy shooting my other pistols.
(0) (0) Watch Unwatch
vuduong173 (verified owner) –
This is one of the best purchases I’ve ever made. I got 2 of these kits and installed them into my P30 (my EDC) and my P30L. This kit is extremely easy to install if you have the right tools. There are a couple of tutorial videos on YouTube on how to install them which helps a lot. The kit drastically reduce the reset on the trigger. I recommend changing the firing pin block spring that comes with the kit as it smooth out the trigger actions quite a bit, both DA and SA. I am happy and satisfied with this purchase!
(0) (0) Watch Unwatch
gtekmitchov (verified owner) –
Easy install, if you have the right tools and knowledge about the system. Usual high quality from GG and it’s obvious how much work went into the concept behind the system if you understand the interaction of the parts. As usual, I had the parts just four days after ordering directly from GG. And it was literally a 10 minute install job. A 400 round burn down verified function with zero issues.
Reset and subsequent take up has been reduced by about 40%, trigger crispness before and after (which were already excellent on this specific example) were identical, with zero loss of tactile feedback.
One caveat. You do need to understand the correct sequence of disassembly and how the parts interact. If you know your way around the innards of an HK (which is perhaps not for the faint of heart or inexperienced, compared, to say, the common Austrian striker gun), this will save you weeks or months of waiting, and hundreds of dollars, over sending it out for the work.
If you really don’t know what you’re doing, it would be best to send to an experienced HK trained armorer for the work. Either way, it’s worth it if you desire a shorter reset and much faster split times.
I’ve been working on HK pistols since the mid 90’s. After I did the install, I reviewed a few YouTube videos on the subject of this very kit. One or two are good, but the vast majority are either cringeworthy or a train wreck. Be very careful where you get your information if this is new to you..
(0) (0) Watch Unwatch
grammcgregor (verified owner) –
I put this in my P30 and my reset is short, sweet and definitive. I am so incredibly pleased with the improvement – unbelievable that such a seemingly insignificant change can make such an improvement! Installed myself with a bit of PhD YouTube.
I will be putting one on my HK45!!!!
Customer service @ Gray Guns is absolutely phenomenal!!
(0) (0) Watch Unwatch
johnweinert62 (verified owner) –
I had this installed on my P30L V1 LEM. The trigger became much more smooth on the initial pull and the reset was greatly reduced. It made what is already a very good gun, a great gun. I wish the trigger had come this way from H&K to begin with. It was expensive to get the kit and get it installed, but worth every penny.
(0) (0) Watch Unwatch
userdefault (verified owner) –
This is a mandatory mod. I never could get 100% used to the standard LEM trigger. Mine is a P30 with TLG + 4.1 LEM setup. Coming from Glocks, I’m just too used to a short reset. This kit totally fixes that issue on the P30 / P2K. The other thing I quite like is the fact Grayguns always uses superb quality materials. If you’re on the fence, or if dealing with the reset has been a pain, stop thinking about it, just buy this kit, and thank me later.
(0) (0) Watch Unwatch
billjohnson (verified owner) –
The reset and smoothness after installing the Grayguns Short Reset System is like night and day. It was even better than I expected!. This modification is definitely a MUST HAVE for anyone with these guns! I have both the P30 and P30 SK, with the V1 Light LEM triggers, and had both of them modified with this system by my local gunsmith this week. The takeup is much smoother and lighter, the overtravel is gone, and the reset is MUCH shorter, and very noticeably so, and I couldn’t be happier! In addition, Grayguns had these shipped and delivered quickly ! If you’re thinking about getting this done, don’t hesitate, it is the best mod you can do for your HK !
Bill Johnson, Edgewood WA
(0) (0) Watch Unwatch
nhuestis201 (verified owner) –
Installed this on my P30SK. Love this kit! Reset is now shorter and crisper than my USP Match. Install is pretty straight forward, just watch the videos on YouTube. Will definitely be putting this kit in all my HKs.
(0) (0) Watch Unwatch
chad30 (verified owner) –
This kit is everything it is said to be! I already has a light fpbs and trs and my trigger was very nice, all except the reset. I’m used to it but Im so glad I found this! It makes this great LEM trigger absolutely perfect! Shortened my reset by approx 40% Thank you Gray Guns for offering this!
Shipping was also super fast! If you have a LEM trigger , this is a must do! You will not regret it. The price is a bargain for what the end result is. Pay someone hundreds to get this kind of performance or spend $100. It is well worth it!
(0) (0) Watch Unwatch
jerseyrob05 (verified owner) –
Although I had already changed out a few springs on my P30l this kit made it perfect, the reset is now very short and crisp. The lighter drop safety spring took both the DA and SA trigger pull weights down by half a pound as well. I can’t wait to shoot it!
(0) (0) Watch Unwatch
nopointsurrender (verified owner) –
After installing their short reset kit in my USP .45 tactical, which reduced reset to next to nothing, I was hopeful for the kit for my P30, which has a mile long reset. The kit dramatically improves the reset to where it’s no longer a weakness of the platform but a strength.
I 100% recommend it to anyone with a P30.
(0) (0) Watch Unwatch
bthigdon (verified owner) –
Once again, I’m totally blown away by the quality of Grayguns products. The P30 series should come like this from the factory. The reset is similar to the P226, and with proper LEM training you can run this thing ridiculously fast.
(0) (0) Watch Unwatch
email1 (verified owner) –
My trigger reset is now closer to my Sig P229 with the Short Reset Trigger which I conceal carry when I can wear a jacket. I conceal carry a HK P30SK V1 LEM in hot weather, I wanted similar trigger resets on both pistols and GRAYGUNS made that possible, Thanks,
10/27/21—
I just picked up a P30l V1 and the first item I ordered for it was the short reset system, Once again I am happy with the results and the reset now matches my P30SK. I do not have the option of leaving 2 reviews.
(1) (0) Watch Unwatch
rad.ekkawi (verified owner) –
Extremely meticulous attention to detail. The only aftermarket company I’d trust to meet or exceed HK standards. This kit will bring your P30 trigger on par with the USP. Removes the creep, reduces stacking from the pull, and shortens the reset by 1/3rd. Highly recommend
(1) (0) Watch Unwatch
bailphoto (verified owner) –
Worked as advertised. Easy install if you know your way around an HK pistol. I do wish it was a little less expensive.
(1) (0) Watch Unwatch
hall6cm (verified owner) –
Installed mine today and it was everything I was hoping it would be. Reset is now very short, almost on par with the legion I used to own which Grayguns also installed. If your biggest gripe with the P30 series is the trigger, this is a great upgrade and can’t wait for it to be back in stock for my other p30L.
(1) (0) Watch Unwatch