HK P30, P2000 Short Reset System

(60 customer reviews)

$90.00

Our HK P30 and P2000 Short Reset System replicates our custom in-house short reset conversion with a drop-in kit for your pistol. These kits are cut from bar stock steel and provide an exacting fit for easy installation.

The kit shortens the reset travel distance by about one-third, reduces trigger over-travel, and reduces pull weight while maintaining all factory safety functions.

This kit is specific to the HK P2000 and P30 models without a thumb safety, including DA/SA, LEM, or CDA LEM 4.1 trigger variations. Review our Fit Guide below.

Two variations are available. One for DA/SA and LEM triggers and one for those who have installed the HK 4.1 trigger system. Ensure you select the correct option.

Fits models without a thumb safety.
SKU: N/A Categories: , Tags: , , , ,

Description

In a convenient, easy-to-install kit, the HK P30 and P2000 Short Reset System replicates the short reset conversion for HK pistols in our custom action work.

The control latch is precisely wire cut EDM from ground bar stock to exacting tolerances. It is correctly heat treated and coated in a durable nickel PTFE finish for a lifetime of durability and smooth function.

Engineered to provide several benefits:

  • Shortens trigger reset travel distance by approximately 33 percent
  • Converts the action to drive the sear directly off the control latch – instead of transferring energy through the catch – for a direct drive connection between the control latch and sear
  • Reduced trigger over travel values
  • Maintains all factory safety functions
  • The kit works with DA/SA and LEM variants or the HK 4.1 trigger system. (Ensure you select the correct option.)
  • Included Grayguns Firing Pin Block Spring reduces stacking in DA pull and lightens trigger pull

Includes

The parts provided – control latch, extended sear roll pin, and firing pin block spring – must be installed together as a complete system.

  • Custom-designed Grayguns Control Latch
  • Custom replacement Firing Pin Block Spring
  • Custom replacement Extended Sear Roll Pin

Fit Guide

The kit works with all variants of the HK P2000 and P30 models without a thumb safety, including:

  • P30
  • P30L
  • P30SK
  • P2000
  • P2000SK

Installation Video

 

Additional information

Weight N/A
Package Dimensions N/A
Trigger Variation

DA/SA and LEM Trigger, CDA LEM 4.1 Trigger

Share your thoughts!

4.92 out of 5 stars

60 reviews

Let us know what you think...

Only logged in customers who have purchased this product may leave a review.

One review with a 1-star rating

  1. 2 out of 4 people found this helpful
    redcurry.yukon

    Nope. Not Quite.

    redcurry.yukon (verified owner)

    I’ve worked on CZs, Sigs, Glocks, Smiths, and 1911s galore. It’s a hobby, fun…usually.

    HOWEVER…the absence of written instructions is inexusable and unforgivable. Just glancing through their install video for a P30 you think ,”cool, easy, I got this” right before you start disassembly on your P2000SK…very different birds. Also, frankly, it’s easier and more efficient to have well-written and illustrated instructions. Grayguns sells $1 worth of machined steel for $90, they can spring for good written instructions.

    So. Frankly, it’s up to you if you enjoy spending a little extra time “figuring out” what they meant, and yes, this is a very nice system for a P30; but Grayguns sells this as an aftermarket part for a P2000SK and on that, well, unless you have the patience of Job and the intuition of Sherlock Holmes, Grayguns kind of screws you.

    I admit I may have been harsh ij my initial assessment and review, however…after reading their reply I am more inclined to feel that I was overly generous towards Grayguns.

    If they had read it in more than passing, they would have had a passing thought “hey, maybe this guy is an armorer”, which I am. Not an HK armorer, but a prior department armorer and very experienced in other platforms.

    Their reply was both kneejerk and condescending. My initial review focused on lamenting their failure to invest in written directions. Not a criticism of their fine product, they simply didn’t deign to actually READ it as a paragraph.

    Now frankly, while I do state they have excellent products (I have their SRTs on both a P226 and a P229, in addition to a P30), their attitude is cavalier at best.

    So. A fine manufactured product, but as your parents should have taught you, be mindful of the company you keep, I am done with Grayguns.

    Upvote if this was helpful (2) Downvote if this was not helpful (2) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Disclaimer

Many parts sold by Grayguns - including but not limited to triggers, trigger kits, internal components and spring kits - are intended for installation by a qualified armorer or gunsmith who is familiar with the firearm.

Although kits fit with no issues in a great majority of pistols, Grayguns cannot guarantee perfect functionality in every instance.

Due to varying tolerances present in all mass-produced firearms, professional fitting by a qualified armorer who is familiar with the pistol's action may be required.

Grayguns offers installation services for all parts kits we offer. If you have any issues or questions about the installation process, STOP IMMEDIATELY and contact the Grayguns Customer Service Team.