Product Reviews
Below, you'll find a single page with all our verified product reviews. There are quite a few—more than 1,500—so we suggest you visit the individual product pages, where you'll find reviews specific to each product.
The small number of one- and two-star reviews posted have received replies from our customer service team. You'll see them on the product pages.
| 5 star | 95% | |
| 4 star | 3% | |
| 3 star | 1% | |
| 2 star | 0% | |
| 1 star | 1% |
1-30 of 1513 reviews
Perfect fit, look amazing on my West German vintage P226. Along with the ELS, SRT and hammer strut support kit. Totally transformed.
My trigger weight went from 7.5 to 3.0 pounds. There is a little creep but very acceptable.. I installed the trigger bar spring different than the video putting the U shaped part in last. If I had a second gun I would not hesitate to install the trigger kit again.
Works great and easy to install
This is a revision of my earlier revision from 21Aug2025.
I sent my P226 MK25 in to GGI for evaluation. It was determined that given the manufacturing tolerances of my particular P226 MK25 pistol, decocking my pistol to remove and replace the slide with this hammer is required.
Simple enough to do, so not a big deal in my mind.
Thus far I really like this hammer, I find my already smooth DA trigger press to be even smoother, with no perceived stacking. It’s also easier to manually cock this hammer than the factory OEM stock hammer was.
Good things! 👍
As advertised and fits perfectly. Definitely heavier than the stock guide rod.
I ordered this backstrap for a P365 Fuse build. I was very impressed with the quality of this item. It fits perfect and does add some weight to the polymer grip module. I have not been to the range yet but it sure is comfortable and can tell it will help with the balance when shooting.. Thanks to GrayGuns for the quick shipping. I will buy from them again in the future without a doubt.
I installed these triggers on my two P2000’s and P2000SK which already have the short reset. In my opinion these are a winning combination for any HK. Gives me much better control.
Nice reduction in DA pull, especially when paired with the fat strut. The adjustable trigger is another huge improvement over stock (MK25 in this case).
Im enjoying the short reset and change to the trigger feel, combined with the flat trigger it was an excellent upgrade. I think i shot my smallest group in ~3000 rounds immediately after the install
I’m a bit late to the patch game, but in my limited experience, these patches are awesome! I love repping my favorite companies, and Gray Guns is right up there. On my last parts order, I got three of these (one each for my collection binder, my patch hat, and my Condition One case for my HKs, using a PullPatch sticky back loop panel), but, for the price, I should have gotten a few extras, as I didn’t think about needing one for my range bag. Definitely will get more with my next order!
Love the results from installing this kit in my HK45T, along with the GG flat trigger. Fantastic product!
Love the difference this makes in my HK45T, especially in combination with the Short Reset Kit. Awesome product!
As mentioned in my previous review, I love the results from installing this kit in my P30L, and planned on eventually obtaining a P30SK LEM, which, of course, the installation of this kit in it would be mandatory in my mind. We’ll, I did, and I did, and am just as happy with the results. Fantastic product!
Great product works great in my P10c ported!
Very poor grip texture. Waaaay too slick for such a small frame.
Installed it myself on Sig Xten. Works well, reduced travel. Excellent trigger. Feels very good.
Really nice quality part. Upgraded the trigger and also added the short reset kit. I was skeptical if I could Install the trigger but managed to get the job done once I found the right combination of tools (4) to the finagle the trigger spring.
P30 V3 Game changer. Paired with the short reset kit, the straight trigger makes the P30 a pleasure to shoot.
Works great in conjunction with the ELS kit.
Works great. Drastic reduction in trigger pull on DA and SA.
Very well made product from company that cares about their customers. Thanks Grayguns!
Just installed the stainless steel guide rod in my p220 stainless elite and it racks easier than the poly one a little gun grease and it works much smoother perfect fit quality made rod
Just a basic upgrade for my German P226. Of course it fit flawlessly!
Just a basic upgrade for my German P226. Of course fits flawlessly!
The difference this kit made was amazing. I added it to a new FCU that came with an OEM curved trigger. Trigger pull weight went from about 4.5-5 to 2-2.5 using the kit’s “competition” parts! Some reduction in weight was expected but less spongy, very smooth break and no over-travel. I was so impressed with this kit when I took it to the range on a full P320 build, I immediately picked-up another flat trigger kit for my SXG build. You will not be disappointed!
Purchased this for my P250 45acp. Very pleased, fit was nice and tight, had to sand the inside rear of the trigger guard due to the P250’s trigger. Would not allow trigger to go back far enough to fire. Very minor adjustment maybe less than a 1/32, took less than 5 minutes. If it had the flat trigger would have been fine. Great product.
Major improvement. The hybrid trigger alone is worthwhile, but the dual adjustability seals the deal. Along with a short reset kit, this truly does make my early 2000s P226 feel like a different (better) gun. Faster follow-ups with no loss of precision. Kudos to GrayGuns for including the non-DAK compatible variant of the system for those of us with older guns. Fast to ship and perfect fit.
These are just perfect! The additional weight helps with felt recoil.
Perfect fit. Install took some work.- buy the pliers for the return spring!! Trigger seems well made and helped with ergonomics. Very quick shipping.
Received listed item followed instruction. Major waste. Per grayguns instruction and talked to cx service using factory(sig xten magazine spring) ammo binds fail to feed. Not perfected.. contact me. J
Blackwell.
Hello John, your experience is not typical, and we want to ensure you are satisfied. I’m sorry it took so long to get back to you, but our lead customer service rep (Chris) reached out to you via email yesterday. (Feb. 2). We’ll get your issue straightened out.